It is not difficult to remove the razor from a razor or disposable blade. If you use a conventional/safety razor, the blade will need to be changed frequently to get a smooth shave. Disposable razor blades must be removed before recycling, and can be used to make crafts that require lots of small and intricate details. However, if you are thinking about hurting yourself, talk to someone you trust or go to a health center or hospital that has mental health services.
Step
Method 1 of 2: Replacing the Razor Blade
Step 1. Replace the razor when it is no longer smooth when you shave
Sometimes, it's hard to know when it's time to change razor blades. Pay attention to the first few strokes as you shave. If it seems like the razor is pulling at the hair, it's time to change the razor.
- You may not be able to tell a fine razor from a dull one just by looking at it.
- Never test the razor in your hand as you could cut it.
Step 2. Twist the razor handle clockwise to open the razor
Grasp the handle with your dominant hand and use the other hand to hold the razor head. Then, turn the handle to the left until the head begins to separate with the handle or top of the razor open and revealing the razor.
- There are several different types of conventional razors, and the method of removing the blade may differ. Pay attention to the razor head when twisting the handle.
- Be careful not to turn the razor sideways or hold it upside down. In that position the razor is easy to fall and harm you.
Step 3. Remove the razor attached to the razor head
Be careful with your fingers or a butter knife, lifting the side of the razor blade to remove it. Try not to touch the sharp edge of the razor when it is released.
When you remove your razor, you can recycle it to reduce waste
Step 4. Install the new razor blade head
Choose a new razor to replace the old one, and carefully tuck it into the gap in the razor head. There's usually a word or arrow listed on the razor to make sure it's pointing in the right direction.
If you don't have an extra razor case or cartridge, be careful when handling the blade
Step 5. Twist the handle clockwise to cover the head and close the razor
Once the razor is in the razor, replace the part that covers the razor, and twist the handle the other way around to secure the head. Tilt the razor to the side to make sure the blade is secure and doesn't fall off your head.
Some handles will lock when the head is securely in place, but that's usually not the case
Method 2 of 2: Removing the Razor from the Disposable Razor
Step 1. Use a clamp to soften the plastic around the razor blade
Hold the sides of the razor over the heat for 15-20 seconds on each side to soften the plastic. Do not completely melt the plastic as this could drip onto the razor and cover it with plastic.
Since most disposable razors are made of cheap plastic, ordinary fire is enough to heat the plastic and release the razor
Step 2. Grip the razor with pointed pliers
Hold the pliers in your dominant hand and the razor grip in the other hand. Position the pliers with 1 end above the blade and 1 end under the blade. If your razor has more than 2 blades, make sure you remove the blade on the top first as it will be easier to grip.
- If your knife only has one razor blade, try pinching one end of the pliers under the razor and resting the other end on top of the razor.
- Grip firmly, but not too firmly on the razor. Although sharp, razors are quite fragile and can be split in half easily.
Step 3. Pull the blade with pliers until it comes out of the plastic
Since the plastic has softened, the razor blade can be pulled out. If the razor doesn't pull out, try reheating the plastic for 10 seconds.
Be careful not to pull the pliers too hard. If you jerk from pulling too fast, the razor could fall and harm you
Step 4. Heat and remove the remaining razor blades in a similar manner
If you need to remove more razors, work from the top to the bottom. While working, reheat the side of the razor for another 10 seconds when it hardens.
If you plan to recycle plastic razors, make sure all the razors have been removed. Sometimes, the blade at the very bottom can be difficult to remove. Be patient and continue to heat the plastic until the razor blade can be removed
Warning
- If you're thinking about hurting yourself, talk to someone you trust, or go to a health center or hospital with mental health services.
- Keep razors out of reach of children and pets.
