Your iPhone is certainly an important part of your life, but it really looks the same as anyone else's cell phone. Making your own iPhone case is a fun way to enhance the look of your phone and express your creativity--and if you already have the materials, it's cheaper than buying a standard case. You can decorate a plain iPhone case, order a custom case from a website, or make your own using home materials. Check out the ideas below. It's time to get creative!
Step
Method 1 of 4: Making an iPhone Case from a Necktie
Step 1. Consider sewing an old tie (look for a newfangled necktie) and turning it into a small cloth wallet for the iPhone
This method is great if you want a stylish place to carry your iPhone, but don't want to use your phone while it's in its case. This is a good time to "recycle" and reuse something that you would have previously thrown away. To make your iPhone pouch, you will need:
- Prepare a tie that is the same width as or more than your phone's width. Choose a tie that catches the eye. If you don't have a tie, look at a flea or vintage clothing store.
- Sharp fabric scissors or rotary cutter (round cutter).
- Ruler.
- Whiteboard marker.
- Cutting board.
- Needle and thread or sewing machine. Choose a thread whose color can enhance the color of the tie.
- Decorative snap buttons or ordinary traditional buttons. You can get these buttons from old clothes that are no longer used. You can also find buttons or a set of buttons at fabric/craft stores.
- Snap fastener or snap fastener pliers. You only need it if you want to attach a snap button (instead of the traditional one) on your iPhone wallet. You can find them at fabric/craft stores.
Step 2. Measure the wallet
Fold the pointy end of the tie and use a ruler to measure from the straight edge. This fringe will be the top of your wallet.
- Use a marker to mark the space where your iPhone is. This space can be 12, 5-17, 5 cm long. Put your iPhone in your tie to make sure there's enough space in your wallet.
- Leave 1.25 cm long for the hem at the bottom of the wallet.
Step 3. Cut the tie straight at the spot you marked with the marker
The result is a large tie piece. Flip this piece.
Leave an extra on the inside of the tie if you want to use it as a cushion for your phone. If not, you can remove it using scissors
Step 4. Sew the bottom of the "wallet" until it's tightly closed
Sew a straight line to close the end of the purse and leave about 1.25 cm (1.25 cm) at the edge you cut from the tie. Now, you have a small cloth wallet in the shape of an iPhone.
- Consider folding the corners and sewing them down so that the edges of your wallet are curved/not pointed.
- Cut off the excess fabric at the bottom of the purse and turn the wallet over again.
Step 5. Attach snap fasteners using snap fasteners
Place the bottom first (the part where the buttons attach) to the front of the wallet, at a position about 0.625 cm from the "V" line below the wallet opening.
- Place another snap button on the outside of the wallet fold, right at the end of the tie. Make sure the two snap fasteners are aligned before you attach them.
- Follow the instructions on the button packaging to make sure you attach it correctly.
- If you want to use a traditional button, just sew it where you want it on the flap: under the "V" line, at a distance of about 0.625 cm from the purse opening. Use fabric scissors to slice the part of the wallet where the buttons will be attached. This slice should be as big as the diameter of the button you're using.
- Consider using Velcro if you want the same effect. You can buy Velcro at a craft store. All you have to do is replace the top and bottom snap buckles with two Velcro buckles. Cut them into small squares and carefully attach them to the fabric using glue.
Step 6. Put the iPhone in the wallet and button the wallet
Make sure the iPhone fits snugly inside and can't fall tucked out.
If you want to travel and don't need a big bag, you can tuck money and photos of yourself in your iPhone wallet. Cases like these serve as cool and practical containers
Method 2 of 4: Making a Case out of Tape
Step 1. Consider making an iPhone case using masking tape
Designs like this involve using a strong lid to keep your iPhone in place, in addition to a plastic "window" that allows you to keep using the touchscreen while the phone is in the case. It may not look as good as other types of cases, but it will still protect your phone while keeping it usable. Here's what you'll need:
- duct tape. You don't need a lot of tape. You can use gray or colorful tape to make your design more festive.
- Plastic disc holder. Make sure it's made of clear, thin plastic; This section will cover the screen of your iPhone, so you have to make sure you can still see the screen of the phone through the case. If you don't have a disc holder, you can use a small lunch box or other thick, transparent plastic.
- Scissors or a craft knife.
- Ruler.
- Whiteboard marker.
Step 2. Measure the width of the plastic cover
Insert your iPhone into the plastic disc holder. Push the phone all the way to the bottom of the closed case, and use a marker to mark the rest of the phone inside the case.
The measurements will make sure your screen cover fits right over your iPhone. Most of the remaining plastic parts will be covered by the tape
Step 3. Take the iPhone out of its place
Use a ruler to draw a straight line that intersects the marker from the marker and is parallel to the casing opening. Cut along this line carefully with scissors.
This way, the casing will be cut in about half. Keep the bottom half closed: this will be the screen cover for your iPhone case
Step 4. Put the iPhone back in the case
Mark the edges of the iPhone screen on the plastic case. Make sure you cover everything (except the screen) with tape. So, you must first know the position of the screen.
- Take out the iPhone and draw a square on the case to mark the position of the screen.
- Consider marking a circular "Home" button. This can be used as a reference about the position of your iPhone. You don't have to worry about the signs; You will use the other side of the case for your screen. Marking is used for measurement purposes only.
Step 5. Cut four strips of tape along your phone
Spread it out with the sticky side facing up. Shape these four pieces of tape into a rectangle (as shown in the picture).
- Make sure your sheet of tape is no longer than the iPhone. When you attach the case to the tape, make sure that no part of the tape is protruding from the bottom or top.
- Make sure that each side of the sheet of tape is perfectly straight. Use scissors to cut the tape if needed.
Step 6. Glue the tape to the casing
Turn the case so that the part marked with the marker is facing down. Glue the sealed edges of the casing to the edges of the tape sheet.
Align the edges of the sheet of tape with one of the lines you drew to mark the vertical edges of your iPhone screen. This tape must not cover the iPhone screen holder
Step 7. Turn the case over so that the tape covers the entire "back" marked with the marker
Cut the sheet of tape along the length: the remainder should be only about 5 mm longer than the uncoated edges of the casing.
Fold this five mm length of tape over the exposed edge of the case so that the phone can be neatly tucked inside. This way, you'll get a neat edge at the end of the tape
Step 8. Make another sheet of tape for the front of the case
This sheet should be about 110 mm long on one side, and only a few mm shorter than the casing length on the other side.
Cut this sheet neatly so that each side is perfectly straight
Step 9. Adhere the sheet of masking tape to the front of the case
Align the edge of the sheet of tape with the other line you've drawn to mark the vertical screen edge--this should be the side closest to the exposed part of the case.
- Make sure the sheet of tape does not extend beyond the bottom or top of the case.
- Turn the entire case over so that the sticky side is facing up. The "window" for the iPhone screen (the front of the case) should be facing down, onto your work surface.
Step 10. Make a cap for your case
It's time to fold the sheets of tape. Take the edge of the sheet of tape on the right and stick it to the inside of the case. Make sure this section is flush with the line you've drawn to mark the location of the iPhone screen.
- This lid will hold the iPhone in place. Make sure the lid is long enough.
- Use iPhone screenmarks for reference only. Glue the edges of the sheet of tape to the opposite side of the casing opening -- that is, to the bottom edge if the mark you're drawing is on the top.
- Do it step by step. Before you attach the sticky part of the sheet of tape, make sure the end is tucked firmly inside the case. Also make sure the edge of the sheet is aligned with the casing opening.
- Try to make the folds as neat as possible even though a little wrinkle won't mess up the function.
Step 11. Trim the top of the case
Stick the tape along the line you drew to mark the top of the iPhone screen.
- Half of each strip of tape should pass through the top of the casing.
- Align the left side of the sheet of tape with the left side of the closed case. Cut the tape to match the length with the right edge of the flap.
- Turn the case over. Cut the tape in half along the line that appears at the opening of the case. After that, fold each side of the masking tape down and stick it on the back of the case. If you don't do this step, the tape will block the opening of your case.
Step 12. Trim the bottom of the case
Stick the tape along the line you drew to mark the bottom of the iPhone screen.
- Half of the tape should protrude under the casing.
- Align the left side of the tape with the left side of the closed plastic case. Cut the tape to match its length with the right side of the case cover.
- Turn your case over again. Cut the sheet of tape in half, along the line created by the opening of the case, then fold each side of the tape over and attach it to the back of the case.
Step 13. Consider thickening your case cover
If you accidentally crease when you fold the lid, you can cover it with an extra layer of masking tape. The extra tape will also make your lid stronger.
- All you have to do is wrap additional tape along the lid. Trim any remaining tape to keep your case cap neat.
- Don't let your lids get too thick--make sure they fit easily into the case!
Step 14. Mark the microphone and headphone channel areas while your iPhone is in the case
Make small holes in these positions to keep the iPhone working. Turn the case so that the plastic window is facing up. Then, place your iPhone on top of the case.
- Microphone: Look for the two wire-filled holes on either side of the charger connector. Look for this hole at the bottom of the iPhone. The hole on the right is the hole for the microphone. Mark its location on the bottom of the case using a marker.
- Headphone line: Locate the hole at the top of the iPhone and make a small mark on the top edge of the case in the same location.
Step 15. Hole the microphone and headphone channels
Use a hole punch to make it neat; You can also punch holes in the tape using a sharp object. Punch holes in the locations you've marked--for both the microphone and headphones.
- Try as much as possible so that the result is only a semicircle on the edge of the casing. This way, you will get a full hole result.
- The most important thing is to make sure that the microphone function is not compromised, and that you can plug headphones into the line.
Step 16. Insert iPhone into its case
You should be able to see the iPhone screen clearly through the plastic "window," and the case cover should cover the front of the phone.
- Slide the cover into the back of the iPhone case to secure its position. If the cap you make is long enough, it will naturally be in a secure position.
- Safe! You can now use your phone's touchscreen while it's in the case.
Method 3 of 4: Decorating a Plain iPhone Case
Step 1. Buy a plain iPhone case
You can find it at most stores that sell iPhones, although you can also buy them online. You can use glue, paint, and other materials to decorate the surface of a plain iPhone case.
- Decide whether you want the case to be soft (made of rubber/plastic) or hard (made of plastic/aluminum). The hard case looks cool and strong, besides, it has an easier surface to decorate. Soft cases are more flexible but tear easily. Plastic casings are also more susceptible to damage than metal casings when subjected to pressure. However, you can still look for plastic cases made of polycarbonate, which can absorb impacts when the phone is dropped.
- If you want to experiment, consider buying the cheapest case you can find. That way, if you don't like the results, you're still relieved that you didn't overspend. Standard plastic cases are also usually less expensive than metal cases and tough cases.
- If you're worried about dropping your phone, consider a rugged, durable, or shock-resistant case to base your creations on. These models are usually more expensive than regular plain cases, but they can protect your phone from the dangers of everyday use.
Step 2. Design your design
Consider what you want to express through your iPhone case. Before you start decorating it, draw the design of the case on a piece of paper. This way, you can refine your vision and get a working template.
- Consider writing your favorite quote on the back of the case. You can do this with paint, stickers, permanent marker, or letter scraps from a variety of sources.
- Consider drawing an animal, anime character, or logo for your favorite sports team. Try tracing the image onto paper before you transfer the image to your iPhone case.
- If you don't like making plans, choose a specific medium (eg paint, mosaic, sticker, glitter) and improvise! Just take it slow and consider all the elements you want to add. Some types of paint and glue may be difficult to clean.
Step 3. Choose your decoration
Consider what you will need to bring your design to life. You'll need adhesives--such as glue, paint, masking tape, etc.--to allow the decorations to stick to the iPhone case.
- Paint: You can use a variety of colored acrylic paints, which you can buy from a craft store. Oil paints and watercolors will not adhere well to the surface of the iPhone case. Consider buying a brush; You can also try painting with a Q-tip pen, sponge, or other household items.
- Nail polish: consider using nail polish as this is an inexpensive option. If you don't have the colors you want, you can buy them at the nearest pharmacy/cosmetic store. Make sure you have acetone or alcohol ready to clean up any mistakes!
- Glue: if you want to attach any shape or object to your iPhone case, prepare some glue. You can use any standard glue--but if you're serious, consider superglue or hot-gun glue to make your decoration last longer. Be careful not to get the glue on your skin. Use little by little.
- Mosaics: arrange paper shapes or pictures on the outside of the iPhone case, then add some glue to keep the decorations from coming off You can buy decoupage glue like Mod Podge from a craft store, or make your own by mixing 3 /4 cup standard glue with 1/4 cup water.
- Stickers: consider using stickers. Stickers are easy to apply and remove, but be aware that stickers are more prone to damage than other decorations, especially when they rub against fingers, cloth, and other surfaces. You can make your own stickers using glue, masking tape, or sticker paper.
- Glitter: consider glitter to liven up the look of your iPhone case. Use an adhesive (such as glue, paint, tape) to attach the glitter. Also consider acrylic paint. Be careful: glitter comes off easily and sticks in various places. You may find glitter stuck to your purse, pocket, or hair.
- Jewelery: consider using rhinestones, beads, costume jewelry, or other faux gems. You can find these gems at costume and craft stores. Some rhinestones are sold with an adhesive back, but if they don't, you'll need to use superglue to attach them.
- Consider mixed media. You can combine acrylic paint with stickers, mosaic with glitter, or rhinestone with all of the options above. Get creative and create spectacular masterpieces!
Step 4. Gather your decorating materials and personalize your iPhone case
Find a clean workspace and take time to be creative.
- Work carefully and systematically. Start with your sketch. Prepare a small towel to quickly wipe off any excess paint or glue before it dries.
- Line the work area with a coat or two of old newspaper before you begin. This way, you don't have to worry about paint or glue spilling over the surface of your furniture.
Step 5. Wait for the paint, glue, or mosaic to dry
Allow the case to dry for at least a few hours before you insert your iPhone.
- Don't touch the paint until you're absolutely sure it's dry. Even the smallest touch can leave a mark that destroys your design.
- Safe! Remember, once your decoration is dry, you can always change it if you don't like it.
Method 4 of 4: Designing Your Own Case Online
Step 1. Consider using an iPhone case site to outline your design
This site is a good option if you are willing to spend around Rp. 350,000, 00-Rp 600,000, 00 to get a unique case with a professional look. Most of these sites allow you to print photos directly onto the case, which can be difficult when you make your own.
Think about the pros and cons. Designing and ordering an iPhone case online can be a lot more expensive, but it creates a cool and professional look for the case. This option may be right for you if you want to incorporate elements of photographic realism into your designs
Step 2. Do an online search with the keyword "custom iPhone case" and select a site
There are many sites like this; compare features and prices before you make a decision.
- Select "Create Your Own" or "Design your case" and follow the instructions on the screen.
- Select your phone model (e.g. iPhone 4, 5S, 6 Plus) and select the type of case you want to personalize. You can choose between several "lite" and heavy-duty options.
- Each site offers several different design templates. If you don't like the interface, price, or features offered on a site, visit another site.
Step 3. Use the site's interface to upload photos, place text, adjust colors, and fine-tune the design
Use this digital format to your advantage--don't hesitate to combine photos you take or images you find online.
- Consider using photos of your favorite places, your pet dog/iguana, your children, or your car. You can upload it directly to the site of your choice if the photo is already stored on your computer.
- Consider using a-j.webp" />
- Consider using your favorite meme or quote. Memes are usually unlicensed, although the source material may be subject to usufructuary law. If you're not sure and can find the creator of the meme, ask permission first.
- Consider using an inspiring panoramic photo: a beautiful sunset, a towering mountain, a dense tropical rainforest, or the ocean in the open. Also consider using photos of your favorite animal or anime character; Consider the logo of your favorite sports team. If you find an image on the internet, search for the copyright. If the image is copyrighted, ask the creator's permission before you use it.
Step 4. Review your design and place an order
Once you are satisfied with your personalized iPhone case, place an order and pay. The company will print your design onto the iPhone case of your choice, and you will receive the case by post/package delivery service.
