In the last 20 years, mobile phone ownership has increased rapidly, with up to 90 percent of the world's population being covered by cellular networks. However, this does not mean the quality of the cell phone signal is getting better. Many users think that there is nothing they can do to improve the signal quality on their own. This assumption is not always true; The following guide will explain what you can do to increase the range of your cell phone without waiting for a new transmitter to appear.
Step
Method 1 of 3: Finding a Position for Better Signal Reception
Step 1. Climb to a higher place
To get more signal, you have to go up to a higher place to be free from interference, or remove existing interference. Some people refer to this method as the "Lion King" method, when you lift your phone in the air, like Rafiki lifting baby Simba. If that doesn't work and you're at the bottom of a hill, start climbing. Up there, maybe the cell phone signal will be better.
- Not all phones are created equal. Some types of cellphones can pick up weak signals well, but some other types of cellphones can't pick up weak signals at all. Ask other people what type of cell phone is suitable for your service provider.
- Know the location of the cellular service provider where you live, so you can point your phone to that location and avoid the possibility of unnecessary obstructions between the signal and your phone.
Step 2. Try to get out of the house or get closer to the window
Don't try to call from inside a building or basement. Buildings and other large buildings are not very mobile signal friendly. If you experience signal problems on the road, try walking to the nearest crossroads; You might get a better signal there.
- Radio waves of cellular frequencies do not penetrate the ground well. If you are underground, you may not be able to receive a signal.
- Also, try downloading a signal map app for your smartphone. These applications usually work by directing users to the nearest network pole and can be very effective at finding a better signal.
Step 3. Go to a distraction-free environment
Today's cell phones are digital phones that are very sensitive to signal cleanliness. In essence, think about finding the "best signal" within your range of vision. Even if you can't see the service provider's mast, what's the most barrier-free path to the open area?
- Also keep in mind that signals can be reflected, so the signal you receive depends not only on the obstacles present, but also on what is reflecting the signal. Even if you're in a distraction-free environment, you might not be able to get a signal if you're overshadowed by a water tower.
- Also, keep in mind that not all cellular masts serve all cellular operators.
Method 2 of 3: Taking Easy Action
Step 1. Keep your phone away from devices that might interfere with its signal, such as laptops, iPads, microwaves, and other electronic objects
Also turn off WiFi and Bluetooth on the phone, and check if turning off both functions frees up the phone's resources to search for signals.
If possible, turn off the devices. If you still can't find a signal, turn off your phone and then turn it back on. Sometimes, the phone just needs to be restarted to solve the problem
Step 2. Try charging your battery to at least two lines
Your phone uses more power when connecting a call, than when it is idle. Often, your battery is strong enough to try to make a call, but not strong enough to find a signal. If you experience signal problems, pay attention and charge your phone.
Step 3. Hold the phone properly
Mobile phone antennas are designed to transmit signals outward, perpendicular to the long part of the antenna. Therefore, the phone looks for a signal in a donut-like shape around the antenna. Generally, if the phone is held upright, you should have no problem finding a signal. However, if you handle it in an odd way, such as holding it from the side or upside down, you will mess up the performance of the antenna. Hold the phone upright to make sure it can find the carrier signal.
- On most new phones, the antenna is located on the bottom of the phone, so if you're having signal problems on your newer phone, turn your phone over to boost the signal.
- On older phones, the antenna can usually be found on the top front of the phone, near the camera.
Step 4. Use WiFi as your mobile signal
Make calls and connect to the internet from your phone as usual. If your phone supports UMA, you can use WiFi as your cell phone signal when you don't have a GSM signal, or are in an area with a weak signal. You can also download some apps to make calls over WiFi, such as Viber.
Not all devices and carriers support UMA calling. Some BlackBerry, Android, and other phones support UMA, and this feature is becoming more and more common as technology advances
Method 3 of 3: Making Technological Changes
Step 1. Try switching to a 2G network
4G and 3G are designed to deliver high-capacity access to mobile phones, but the base station and mobile phones must be a certain distance apart for this technology to work effectively. The further away you are from the base station, the weaker the signal you can receive. If you absolutely need to be reachable by phone and SMS, consider using a 2G network. 2G networks offer lower access speeds than more advanced network technologies, but you can enjoy coverage in many places, especially in places where 3G/4G is hard to reach.
- Examples of places that are difficult to reach 3G/4G are in the middle of crowded housing or closed places. Due to its low access speed, 2G networks can penetrate hard-to-reach places. However, your internet speed will not be as fast as 3G/4G, but the 2G network can still be used for calls and SMS.
- In addition, your phone's battery will be more efficient because the 2G network does not consume too much power. Read your phone guide to find out how to set your phone to 2G.
Step 2. Use smart signal booster
Recently, smart signal amplifiers have been developed. This category of signal amplifier uses powerful "baseband" processors to clean up the signal before retransmission (hence, this signal amplifier gets the "smart" title). Most smart signal boosters can boost the signal up to 100db (compare with analog signal booster which can only boost up to 63-70db). The difference in signal strength that can be achieved is 1000 to 2500 times.
Some of these types of signal amplifiers can be connected directly, although they are more expensive than analog signal amplifiers. You just need to connect the signal booster, without the need for complicated outdoor antennas (usually the donor antenna is in the signal amplifier box). Because this signal booster is completely user-friendly, it is compatible with almost all carriers, requires no setup, and really works. Often, smart signal boosters are carrier-bound; You should get a signal booster that is compatible with your carrier
Step 3. Use the "repeater"
If you experience signal problems in certain locations, such as your home or office, try installing a "repeater". The "Repeater" picks up a weak signal, amplifies the signal, and spreads it over a specific area. "Repeaters" typically require two signal lines where they are installed (usually on the roof), but can greatly improve signal quality, download speed, and battery performance.
Installation of some "repeaters" requires technical knowledge such as the frequency of your cellular network, and only works for certain carriers. To improve the signal quality of all operators without thinking about technical problems, use a dual frequency "repeater"
Step 4. Upgrade your antenna
Some cell phone manufacturers make "Hi-gain" antennas for their cell phones, which can be installed in stores or by users. While these antennas don't (always) improve signal as well as a "repeater", they are relatively inexpensive, and you don't need to be tied to a specific location to use them.
Step 5. Change the carrier
Most carriers operate independently, with their own frequencies and transmitter masts. If one carrier has a poor signal, you may be able to get a better signal if you change carriers. Most cellular networks today allow users to change their number when they change carriers.
Some carriers will offer you great deals if you're a new customer -- big companies are starting to lose newbie customers, so they have to steal customers from competitors. Look for the operator that has the best network and offers in your area
Step 6. Place the cellular transmitter in the house
This step may take some time, but when your local cellular network is unsatisfactory, property owners can place cellular base stations on their properties for major carriers. A third party with a "Wireless Revenue Program" allows you to register your property to qualify your property. Then, if the operator is interested in developing the network in your area, your place will enter their list of places of choice, and you will also enjoy optimal service.
The carrier may even pay for your cell phone bill. So, why not>
Tips
- If all steps fail, change your carrier.
- If you want to improve the signal quality in your car, use a car signal booster with 12v adapter or lighter adapter.
- Arid weather, high humidity, and lightning can reduce signal quality. If your area is arid, you may need to call a rain handler.
- If your phone can't find a signal, it will perform a battery-consuming search process. Hence, a bad signal will drain your battery. You'll know what it's like if you forget to turn off your phone on an airplane. If you have a cell phone signal booster in your building, you'll notice that your phone's battery is more efficient, because your phone doesn't have to search for a signal and always gets the best signal.
