This Wikihow article will teach you how to keep your headphones looking and sounding great for years by properly caring for and storing your device and using it at low volume.
Step
Part 1 of 2: Preventing Physical Damage
Step 1. Unplug the headphone jack, not the cable
When removing the headphone jack from the audio source, hold it tightly and then pull the plug. If you pull on the cable, the connector will take extra pressure and may damage your headphones.
Step 2. Pull firmly, not sharply
If your headphone jack is firmly plugged in, remove the connector firmly and steadily. If you jerk it, the cable may be damaged.
Step 3. Do not leave the headphones on the floor
Of course, putting headphones on the floor is a surefire way to damage your device. Always place the headphones on a table, or in a safe place when not in use.
Step 4. Don't leave headphones plugged in
When you're not using headphones, don't leave them plugged in. If the cable is accidentally caught, the headphones may be damaged if you stand or move.
Step 5. Wrap up your cables when not in use
This is especially important for portable headphones without cable shields. If the cord is tangled, the connection may be damaged and weakened. Don't just put your headphones in your trouser pocket.
- You can use binding clips or cut a few notches from an old gift card to wrap the headphone cable easily and securely.
- Avoid tying or putting pressure on the cable.
Step 6. Don't dangle the headphone cable
If gravity pulls on your headphone cord, it will put unnecessary pressure on the cord joint. Do not let the headphone cable dangle from the table or bag.
Step 7. Avoid contact with water
Like all electronic devices, headphones should never come into contact with water. If the headphones get soaked, dry them quickly, pour rubbing alcohol on the wet area, then allow them to dry for a few hours. Thus, the headphones can still be used again.
Step 8. Avoid sleeping with headphones on
As well as damaging your hearing, rolling over while wearing headphones can cut the cord.
Step 9. Provide a case or case for your headphones
If you often carry your headphones with you, consider using a case or case. You can buy a case or case that fits your headphones, or get a universal case designed for many types of headphones
Step 10. Buy high-quality headphones
Cheap headphones are usually of poor quality. If your headphones are regularly subjected to unavoidable stress, it's a good idea to buy a more expensive one so they can withstand the heavier pressure.
The braided cable will prevent tangles and tangles, which makes the headphones last longer
Part 2 of 2: Preventing Damage from Audio Equipment
Step 1. Mute the audio before plugging in the headphones
Headphones can be damaged if plugged in while a song is playing at high volume. Turn down the volume of the audio device first before plugging in the headphones, and away from your head until the headphone cable is inserted into the device.
Once your headphones are plugged in, turn up the volume until the sound is comfortable
Step 2. Keep your volume down
High volumes not only damage your hearing, they also damage the headphone speakers. This causes permanent hum and distortion. If you hear the sound starting to crack, it means your volume is too high.
Avoid setting the volume to maximum, as this increases the chances of your headphone speakers being damaged. If you need to increase the volume of your headphones but the sound is no longer available, look into your headphone amplifier
Step 3. Turn down the bus
Most headphones don't have a strong bass driver, and bass that's too strong can damage the speakers. Bass is a low-frequency sound, and puts a lot of stress on loudspeakers if they aren't specially designed. Use your device's volume control to lower the bass level, making sure to deactivate the “Bass Boost” option.
Step 4. Use headphones that can handle the output
This is not a big problem if you use headphones from your phone or computer. However, when you connect to high-quality stereo equipment, make sure that your headphones can handle the output power. Using low quality headphones for a strong source can damage the headphones.
Check your headphones documentation to determine the ohms that can be supported, as well as the output ohms of the audio source
Tips
- If you roll the headphones around the music player when not in use, make sure that the cable is not plugged in so it doesn't break.
- When buying headphones, look for ones with some sort of tension relief (the flexible plastic comb at the end of the connector). This addition can prevent the cable from being pulled from the headphones.
- If so, use the volume limiting system on your stereo or MP3 player. This will prevent damage to your hearing power and extend the life of the headphones.
- Take your headphones out of your pocket before washing your clothes.
Warning
- Listening to loud music for long periods of time can permanently damage your hearing.
- If other people hear music from your headphones, it means you have headphones open. Usually, with closed headphones, the sound cannot be heard by others. However, if you're wearing headphones that are covered and the sound can be heard by others, then your music is too loud.
