Ties are growing in popularity as a trendy accessory that can be worn outside of the usual office situation. With the movement to make their own items that is also increasingly popular, it's no wonder that many people are now inspired to make unique ties. Ties can be made from a variety of fabrics and are easy for anyone to make. You are in control of choosing the pattern, fabric, and length of the tie when making your own tie at a fraction of the cost. There are a number of easy steps to follow, whether it's a tie for yourself or you're making a cool tie to give your dad on Father's Day.
Step
Method 1 of 5: Preparing Ingredients
Step 1. Purchase your favorite fabric from your local craft store
You don't have to limit yourself to a certain type of fabric to make a great tie, but thicker fabrics tend to work better. For a tie, you will need at least 1.4 meters of fabric for the front of the tie and about 12.5 x 15 cm of fabric for the back layer.
- Silk is a popular choice for tie lining.
- For a casual tie, choose cotton, linen, or denim.
Step 2. Purchase interfacing for the inside of the tie
Ties are made of a material called interfacing, which is sewn or ironed on the inside of the tie as a lining. This interfacing allows the fabric to keep its shape stable. You will need 1.4 meters of interfacing in a color that matches the tie fabric.
- For direct bonding interfacing, the glossy side will be placed face down on the tie fabric to be permanently attached to the tie. Be sure to buy interfacing that can be sewn and stick together because the tie will be sewn later.
- Interfacing sewn on the inside is not glossy. This section is sewn on the inside of the seam line so that there are no visible seams on the outside of the tie.
Step 3. Purchase other necessary equipment
In addition to the fabric and interfacing, you will need to purchase the following equipment:
- Thin thread that matches the tie fabric
- Sharp scissors
- Needle (if sewing a tie by hand) or sewing machine
- Pen needle
- Tape measure
- Iron
Step 4. Choose a pattern
There are many tie patterns to choose from. When you find a style you like, you can print a tie pattern from the internet for free. Another alternative to printing a tie pattern is to use a ruler to trace another tie.
- When printing a tie pattern, it will continue on more than one page because the length of the tie will be longer than a standard sheet of printing paper. Glue all the paper when you trace it to the fabric.
- You'll need about 1cm of additional space beyond the tracing line to use for the later inner stitches.
Method 2 of 5: Preparing the Fabric for the Classic Tie Pattern
Step 1. Start with the classic tie pattern
This pattern is a simple and flexible style. You can find a wide variety of patterns from the width to the length of the tie. Print out a pattern you like and make sure it's a classic tie pattern and has a diamond cut at the bottom.
Step 2. Prepare the fabric
Before cutting, be sure to iron the back of the fabric on a low setting to remove any creases, creases, or bends that could cause the fabric to cut unevenly. To iron it, spread the fabric evenly on the work surface, inside out, and move the iron in small circular motions across the fabric.
Step 3. Watch the shrinkage of the fabric
If using a fabric other than silk, you will need to shrink the fabric by washing and drying it before ironing. This will ensure that the fabric does not shrink if the tie is steamed or washed.
If the interfacing has not yet shrunk, shrink it by soaking it in hot water for 10 minutes, then pat dry and iron
Method 3 of 5: Cutting the Fabric
Step 1. Spread the tie pattern on the fabric
It is important to cut the fabric for the tie at an angle (diagonally across the texture of the fabric) so that the fabric is more elastic. Remember, make sure the fabric is stretched out in a smooth condition with no dents.
If the fabric has already been patterned, imagine what the pattern will look like when the fabric is cut. Re-layout the pattern to make sure the fabric looks good
Step 2. Trace the tie pattern
Use weights or tongs to hold the pattern together. Then, use a piece of chalk to carefully trace the pattern onto the inside of the fabric. Chalk is a safe and easy tracing tool for this type of work.
Step 3. Cut the fabric carefully
Use sharp fabric scissors to cut the fabric about 1 cm beyond the chalk line. This will leave room to sew the inner seam. If you are using a more difficult-to-handle fabric, you will need to use a rotary cutter (a special tool for cutting fabric).
Cut slowly to avoid mistakes and wasted fabric
Step 4. Repeat the process by tracing the interfacing
Spread the tie pattern on the interfacing and use chalk to trace it. Then, carefully cut the interfacing using sharp scissors or a rotary cutter. The interfacing will have the same shape as the cut fabric, but will not require any area between the edge and the sewing line so cut directly on the chalk line.
Step 5. Cut the backing off
You will need to measure the back liner to match the diamond cut at the bottom of the tie. This will be used to cover the back of the tie which will be visible after the tie is folded and sewn. This upholstery is also a great place to insert a tie tail back. This upholstery will be cut across the top, then following the bottom cut of the tie pattern.
Method 4 of 5: Installing the Interfacing
Step 1. Check the interfacing
Before attaching the interfacing to the fabric, double-check that it has been pre-shrunk by the fabric manufacturer or you. Also, be sure to follow the specific instructions for the type of interfacing, depending on whether you purchased a stitchable or a direct-fitting type.
Step 2. Iron the interfacing
If you purchased direct bonding interfacing, now is the time to iron it on the fabric. You will be ironing the glossy or rough side of the interfacing along with the inside of the fabric. The best way to do this is to spread the fabric with the outside facing the table. Then, spread the glossy side of the interfacing over the fabric. Instead of ironing the interfacing directly, spread a thin towel over the interfacing to protect it from slipping or sticking to the iron.
Make sure the interfacing is smooth ironed over the entire surface of the tie
Step 3. Sew the interfacing
If you purchased interfacing that is non-adhesive and specifically designed for sewing, you will need to sew it onto the fabric. This is a good choice if you are purchasing a heat-sensitive tie cloth. You can sew the interfacing by hand using a needle and thread or a sewing machine.
Method 5 of 5: Sewing and Ironing a Tie
Step 1. Sew the tie
You can use a needle and thread or a sewing machine to do this. As with most tie patterns, you will sew the ends first. Then, you will fold the back of the tie to sew in the middle.
- Make sure the edges are aligned properly and the seams are straight.
- The tie should be sewn with the fabric folded inward so that the seam is not visible on the outside.
Step 2. Attach the bottom lining to the back of the tie
All you need to do is sew the back lining to the three outer edges and leave a straight line running across the tie and leaving it open so you can insert the tail in the back of the tie later.
Step 3. Use a soom stitch to sew along the center seam line of the bottom of the tie
Sew the two folded edges together from the top of the tie to the end of the fold. Be sure not to sew all the seams, as the thread should not be visible on the front of the tie.
Step 4. Iron the tie to finish this job
Use an iron to flatten the creases and iron the tie until it is even. Make sure you set the iron to the correct setting for the tie fabric. If the tie has been flattened, the tie is ready to be worn according to the style you like.
Step 5. Done
Tips
- When cutting fabric, it should be cut at an angle (diagonally across the texture of the fabric).
- There are many different types of ties that can be made, such as the seven-fold tie.
- When making a tie, do not forget to adjust the length of the tie to the height of the wearer.
- The standard length of a tie is 145 cm from end to end.
