Are you looking for a tutu to complete a costume, a unique makeover, or as a gift? This tutu can be made quickly and easily, perfect for those who don't like or can sew. Follow the steps starting from Step 1!
Step
Method 1 of 2: Knotting Tulle
Step 1. Take the size
Use a tape measure to measure your waist or hip circumference. The part that is measured will be where the tutu will hang. In addition, also determine the length of the skirt from waist circumference to leg length.
Step 2. Select the material
The two main materials for making a tutu are tulle and ribbon. You can choose the color you like. Depending on the size of the wearer and the length of the skirt, the fabric required is about 2-6.5 meters.
Step 3. Make the waistband
Cut the ribbon along the waistline plus 30 cm (15 cm at each end of the ribbon). Thus the ribbon is long enough to be tied. Tie the ribbon into a tail knot so tulle can be added easily and know when to stop adding fabric.
Step 4. Cut the tulle
Make several strips of tulle that are twice the length of the skirt you want. For example, if the desired length of the skirt is 38 cm, then make a tulle strip of 76 cm. Make 20 strips to start, and cut a few extra strips later if needed.
- To make the skirt look fuller, make lots of thin, small stripes.
- To create a skirt that looks flat, just make a few wide strips of tulle.
Step 5. Fold the tulle strip in half
When adding tulle to a skirt, fold each strip in half. Now there is one fold at one end and two tails at the other.
Step 6. Make a knot on the waistband
Thread the tulle folded in half over the waistband so that only a few inches from the knot comes through the top. Then fold the tulle tails around the waistband and pull them both through the knot.
Step 7. Tighten the knot
As the tulle strip is pulled through the knot, secure it and tuck it into the waistband to make room for another strip. A tight tulle knot will stabilize the skirt and make it look good.
Step 8. Add the strips until they are full
Strips of tulle continue to be added around the waistband until it is full. Tie all the strips together to make the skirt look full, or leave it slightly spaced for a flat look. The tulle strip can be finished adding when it reaches the knot.
Step 9. Tie on the tutu
To finish, untie the knot in the waistband and try to wrap it around your waist. Wrap the tutu around the waist and tie the tail of the ribbon into a knot.
Step 10. Done
This tutu is a great accessory to complement a skirt, leggings or dress.
Method 2 of 2: Fake Stitches
Step 1. Purchase sewing tape
This material looks like a ribbon-shaped fabric. You can buy them at sewing supply stores. You can simply clamp this material in place and iron it until it melts and acts like glue.
Step 2. Get the right type of fabric
We recommend that you do not use tulle for this style. It is recommended to use a cloth with tight fibers, so that the glue can adhere tightly. Organza fabric is good because it is still suitable for ballet, but it is more expensive.
Step 3. Cut your fabric panels
Cut several panels of fabric to the desired length of the skirt plus 6 cm. The width is adjusted as needed: the wide panels mean less gap while the shorter panels are easier to fit into the waistband. The more panels are inserted the volume of the skirt will increase.
Step 4. Clamp the panels in place
Cut several strips of stitching tape to the width of the panels. Then, fold it over the top of the panel so that there is a 6cm long overlap. Place the seam tape between the seams and pin it as close to the bottom edge as possible. Leave a gap at the top for the waistband to enter later.
Step 5. Iron the “seams”
Follow the instructions for the seam tape and iron on each panel.
Step 6. Add the waistband
Use a ribbon or waistband as a waistband, embroidering the panels onto the waistband one by one. Use a pencil as a tool. When the skirt looks full enough, tie this tutu around your waist and enjoy!