Putting on earrings is actually easy and won't hurt once you get used to it. Just make sure to clean the earrings you wear with a disinfectant before putting them on. After that, you just need to insert each earring into the hole in the ear while gently twisting and attaching the clip behind the ear. Finally, make sure the position is right!
Step
Method 1 of 3: Preparing the Earrings
Step 1. Wet a cotton ball with rubbing alcohol
Before installing jewelry, you must first clean it from germs. Even if you suspect the earrings are clean, there's still a chance that bacteria may be living there. It's worth taking a minute to clean your earrings rather than risking a painful infection!
- If you don't have a cotton ball, you can use paper towels, toilet paper, or any clean cotton ball. A clean cloth should also be able to absorb the alcohol.
- If alcohol isn't available, use hydrogen peroxide or another skin-safe disinfectant.
Step 2. Clean the earrings
Wipe the front and back of each earring, then wipe with a cotton swab moistened with alcohol. Let the earrings soak up the disinfectant for about 30 seconds. After that, remove the cotton and use a clean cloth or tissue to dry the earrings.
Be sure to always clean your earrings before putting them in your ears. You never know when this piece of jewelry comes into contact with harmful bacteria
Step 3. Consider lubricating the earrings
Applying a small amount of Vaseline or petroleum jelly to the pointed end of the earring will make it slicker. That way, you can more easily insert it into the hole in the ear.
Step 4. Ear piercing
Make sure your ears are pierced before putting on earrings. If possible, visit a professional piercer at a mall or piercing studio. Earrings will be much easier to put on if you have had your ears pierced before.
- Make sure the hole size matches the size of the earring.
- If you're brave, try getting your own ears pierced at home. However, be careful. Sterilize all of your piercing equipment and consider asking your more experienced friend for help.
Method 2 of 3: Attaching Earrings
Step 1. Insert the earring into the hole in the earlobe
Insert the pointed end of the earring first, then twist gently as the earring begins to slide. You may have to shake the earring slightly to get it through the piercing hole. Sometimes, earrings tilt to one side. Keep pushing the earring until the front meets the earlobe, or until it goes as far as you want.
Earrings are usually placed in the earlobe. This section is quite thick, but lacks cartilage. Dangle earrings fit perfectly in the earlobe. In addition, installing earrings in this section will not be too painful
Step 2. Pull the earlobe if you have trouble inserting the earring
Pulling the earlobe will make the piercing bigger for a while. That way, the earrings will be easier to insert. As you wear the earring, the piercing around it will gradually increase in size.
Step 3. Attach the earring clip
Once the front of the earring is completely in the earlobe, slide the metal hook on the back. Slowly, gently join the back of the earring with the center. After that, the earrings are done!
- This back may not be present on some earrings. If your earrings are just metal hooks, just make sure they are securely attached to your ears.
- If you're wearing hoop earrings, the clasps are likely on the hoop itself. Insert the ring-shaped earring until the smooth, unbroken part is in contact with the ear. After that, tie the hoop of the earring and adjust it so that the clip is behind the ear.
Method 3 of 3: Wearing and Caring for Earrings
Step 1. Make sure that each earring is securely attached
Shake the earring right and left. Make sure the earrings are comfortable to wear. Look at your earrings in the mirror to make sure they look the way you want them to.
Make sure the earrings are facing in the right direction. If you're wearing decorative earrings that are large in size, there's likely to be a completely different front and back. Check the earrings, make sure they match
Step 2. Remove the earrings
The first time you take your earrings off, stand in front of a mirror. Remove the earring plug from the back then slowly pull the earring from the front. After that, pull the earring from the front of the ear while twisting it slowly. Allow the earring to slide slowly out of the skin layer.
- Consider cleaning your earrings with a disinfectant after and before wearing them.
- If you don't wear your earrings for a long time, the piercing will close. Put on your earrings regularly so you don't have to get your ears pierced again!
Step 3. Wear earrings on sensitive skin
Your skin may be irritated if you wear cheap metal earrings. Try applying a coat of clear nail polish to the back of the earring to protect the skin. You may have to apply this layer again after a while of wearing the earrings.
Ask the type of metal on the earring to the maker or seller. Many people are allergic to nickel. However, it is possible that this material was used to make earrings that were sold at cheap prices
Tips
- Gently tug on the earlobe as you try to put on new earrings. Pulling the earlobe will make the hole slightly larger and make it easier for you to insert the earring.
- Earrings won't hurt too much when you take them off if the back is in the middle.
- If you can't get the earring through the hole, take it out first and then try to reinsert it from a different angle.
