Come on, learn how to draw an airplane. Just follow the simple steps in this tutorial.
Step
Method 1 of 4: Airplane Boeing 747

Step 1. Draw an oval for the face of the plane

Step 2. Draw a curve on the left edge of the oval for the nose of the plane, and a semi-rectangle on the right edge for the fuselage

Step 3. Draw a triangle for the back, then add a trapezoid on top for the tail

Step 4. Draw some semi-rectangles for the wings and stabilizers

Step 5. Draw another small trapezoid for the winglet and a few small triangles for the funnel connector

Step 6. Draw some ovals for the funnel

Step 7. Based on this sketch, refine the entire fuselage

Step 8. Add details like windows, doors, details on the wings, and details on the funnel

Step 9. Erase unnecessary lines

Step 10. Time to color your airplane
Method 2 of 4: Cartoon Airplane

Step 1. Draw a long arch
Make sure the left corner looks like the letter C.

Step 2. Draw the same but inverted curve on top of the first curve, with the ends of the two arches meeting each other, to produce a sketch of the fuselage

Step 3. For the wings, add a slanted rectangle on each side of the body

Step 4. Draw three rectangles on the back of the plane, which serve as horizontal stabilizers and vertical stabilizers

Step 5. Remove unnecessary lines from the sketch

Step 6. Draw curves under each wing to form the engine

Step 7. Add details like windows and doors

Step 8. Color your image
Method 3 of 4: Airplane Boeing 787

Step 1. Draw an inclined cylinder for the fuselage

Step 2. Draw two curves--one arc for the nose of the plane, the other tapered for the back

Step 3. Draw a trapezoid on the back for the tail wings

Step 4. Draw some trapezoids for the wings on the sides of the fuselage and the horizontal stabilizers

Step 5. Draw two cylinders connected to each side flange for the funnel

Step 6. Based on this sketch, refine the entire fuselage

Step 7. Add details like windows, doors, details on the wings, and details on the funnel

Step 8. Erase unnecessary lines

Step 9. Color your airplane
Method 4 of 4: Biplane

Step 1. Draw a big X in the center of the paper
These two lines will be your guides when drawing a double-winged airplane.

Step 2. Using one of the slanted lines as a guide, draw a rectangle to the lower left of the guide line. Add a triangle at the end of the rectangle, extending all the way to the top right of the guide line
Don't put a sharp edge on the triangle. Replace it with a small slash to make it look like it has 4 corners. This section serves as the fuselage.

Step 3. To make it look 3D, draw the same shape under the first shape, then connect the two with vertical lines

Step 4. Form the cockpit by drawing some rectangles on top of the fuselage

Step 5. For the wings, draw 2 rectangles, one each on the side of the fuselage and extending all the way to the end of the guide line

Step 6. Add horizontal stabilizers and vertical stabilizers to the tail of the plane

Step 7. For the landing gear, draw a circle, then connect it to the plane with slanted lines

Step 8. Draw the propeller and spinner on the front of the plane
