Are you considering attaching a leash or harness to your cat? Maybe you want to take him outside for a walk, or you need to go out with him, and are afraid he'll run away. Whatever the reason, a leash is a good choice because the cat will have a harder time breaking free than it would be with a collar. At first, this type of fastener may seem confusing, but actually, it is very easy to install once you understand how.
Step
Part 1 of 3: Buying a Leash for Cats
Step 1. Choose a cat-only type of binder
There are two types of straps for cats, namely the number 8 and the letter H. The main difference is that the number 8 binder only consists of two knots attached to the cat's shoulder, while the H-shaped strap has a short strap on the back with two knots. at the end of the rope.
Both types of binders are equally good for cats. According to some owners, cats have a harder time breaking free from the figure 8 harness. The shape and size of this type of harness is indeed tighter and therefore considered safer for some cats
Step 2. Find out the right size for your cat
The size of the binder varies, ranging from small, medium, to large. These three sizes usually refer to the cat's chest circumference, which is generally 30, 32, 34 or 36 cm.
- Most ties have an adjustable loophole, but that's not to say they're designed to be small enough for larger cats. Instead, this size is designed for comfort and for the fasteners to be securely attached.
- Measure your cat's chest circumference with a tape measure and measure just behind the front paws. Loop the tape measure and make sure it doesn't twist. Tighten a little so that the meter is tight enough, but not too tight for the cat. Record this size and add 5-7 cm. The result of this measurement is the size of the fastener you should buy.
Step 3. Purchase a binder
Cat harnesses are commonly available at pet stores in a variety of colors and materials. However, if you've already thought of a particular model, the easiest way to get it is to buy it online.
Note that the size of each brand may vary. Large (L) straps from one particular brand, may not be as big as other brands
Part 2 of 3: Installing the Model Figure 8. Fastener
Step 1. Learn how to position the harness properly when attached to the cat
Hold on to the straight piece of string between the two knot holes. Pay attention to the two hanging holes, find which one is smaller. This smaller hole will fit through the cat's head and don't need to be opened. The larger hole will be placed in the chest and will need to be opened first.
Step 2. Insert the cat's head through the smaller hole
The point where the two loops of the knot joins the cord should be just above the cat's shoulder. Tuck the strap so that the cross section of the figure 8 fits right between the cat's shoulder blades without removing the smaller knot holes.
Step 3. Attach the large knot hole to the cat's midsection
Tuck both ends of the large bowknot string under the cat's chest. Check for any twisting and straightening to make it comfortable for the cat. Then, tighten the buckle.
If the knot is too small, loosen it by adjusting the length on the sizing section
Step 4. Check the comfort of the fastener
The leash is snug and snug if it is tight enough but allows you to fit two to three fingers between the leash and your cat. Use the lengthening section of the leash to adjust the tightness of the leash until you are sure that the cat is both comfortable and safe.
Step 5. Allow the cat to acclimate to the leash in the room
You have to make the cat feel so comfortable with the leash that it forgets that it is wearing it. While not all cats can be like this, it is possible for some cats.
Leaving the harness next to the feeder may help the cat to accept the new harness. This step will help your cat associate the leash with fun
Part 3 of 3: Fitting a H-Style Cat Harness
Step 1. Learn how the H-style strap should be attached to the cat
This model strap has a strap that attaches to the bottom of the cat's chest, between its front paws, in addition to the two loopholes and the straight strap that is also on the figure 8 strap.
If your H-style knot loop has two straight sections on either side of the knot, your tie will have back and chest straps. It is not difficult to identify which is the back strap because the length is always shorter than the chest strap
Step 2. Attach the strap to the cat
Find a short straight rope (back strap), and hold it. Slide the cat's head through the smaller eyelet. Release the chest strap buckle and you'll find a big D forming between the eyelet and the chest strap. Insert the cat's front paws into the space formed between the leash. Tuck the chest strap under the cat's chest, as well as the other side, then, tighten the buckle again.
Step 3. Check the tightness of the fastener
The H-style strap is comfortable when it's tightly attached, but loose enough that you can slip two to three fingers between the leash and the cat's body. It's important, and you should take the time to adjust the length of the strap the first time you put it on.
Slide the strap to change the size of the hole until you are satisfied that the strap fits snugly
Step 4. Let the cat acclimate to the leash
The cat should get so used to the leash that he forgets he's wearing it. Remember, not all cats will immediately feel comfortable when wearing a leash. So if your cat is showing resistance, think again about whether you have the time and patience for this kind of exercise.
- To help your cat, let him sniff out the leash and leave the leash around for some time before trying to attach it. This will make the cat more comfortable.
- Now you're ready to put the leash on and go for a walk together!
