A graphic equalizer, more commonly known as EQ is used to change the frequency response, or in other words the pitch of a voice, song or instrument. It can be used to increase bass, decrease bass, increase treble, etc. Learning to use the graphic equalizer isn't that hard, but it does take a little practice to get used to.
Step
Step 1. Set all EQ bands to 0, or in the middle
This will make the audio come out of the speakers without any effect.
Step 2. Listen to your audio through the speakers to determine if it needs to be added something or not
Step 3. Remember that on the left side of the unit, which usually starts with a number around 20, is the low or bass section; the right hand side, usually ending around 16k, is the high or treble section
In the middle is between 400 and 1.6k.
Step 4. Adjust the equalizer as you wish once you get the hang of it
Step 5. Turn the volume to the level you want if you have the equalizer set to your liking
Tips
- Do not be too excessive in setting the EQ. The equalizer can balance the flaws of your audio equipment, but remember that professional technicians, with input from the artist, balance the equalizer before the recording is produced. However, different speakers produce different sounds, and even the same speaker has varying frequency responses depending on the placement of the speakers. Thus, one of the main functions of the equalizer is to respond and adjust the frequency response of the speakers.
- Usually the bass just needs to be increased or decreased a bit, but the treble in any case can make your audio "not clear". Once you get the bass setting you want, and depending on the speaker capacity, then adjust the treble (adjustment on the far right), then the area in the middle if you still feel the need to adjust it.
- EQ is a simple effect, but it can be difficult for you.
- You can make your audio sound worse, so experiment with EQ.
