Removing ink stains from the surface of the wall may be quite complicated for some people. Stubborn ink stains may be difficult to remove with gentle cleaning methods. However, if the ink stains are cleaned too harshly, the paint on the walls may be damaged. If you want to remove an ink stain from a wall surface, start with a gentle cleaning method and then work your way up to a stronger one. In addition, there are several ways to protect the paint layer during the ink stain removal process.
Step
Method 1 of 3: Gently Remove Ink Stains
Step 1. Wipe the ink stain with a clean damp cloth
If the ink stain has not dried, you can remove it using a damp cloth. Wipe the ink stains at once, then wipe again with a clean part of the cloth.
- To remove small ink stains, you can use your fingertips. Wrap your fingertips with a damp cloth, then wipe the ink stains that stick.
- You can also add a little dish soap. After that, don't forget to wipe the surface of the wall with clean water.
- Use a clean, soft cloth first. If the ink smudges are still on, you can try a more abrasive cloth or sponge. Remember, don't use a rough cloth if you don't need to.
- Do not wipe the wall surface with too much water. Wet the cloth and wring it out so it doesn't get too wet.
Step 2. Try using a pencil eraser
Pencil eraser can remove ink stains on wall surfaces safely and gently, without damaging the paint that coats the walls. In addition, you can also easily determine which parts of the wall surface need cleaning.
- Use a clean pencil eraser.
- Gently rub the pencil eraser on the stained area of the wall.
Step 3. Make a baking soda paste
Baking soda can remove stubborn stains quite effectively. However, baking soda is quite abrasive, so you need to be careful when using this method. Make a baking soda paste by mixing 1 tablespoon of baking soda with 2-3 tablespoons of water.
- To remove ink stains from the walls, apply baking soda paste to the stained areas using a cotton ball, clean cloth, toothbrush, or sponge. After that, rub the ink stains that stick gently. Wipe off any remaining soda paste with a damp cloth.
- You may have to repeat this process many times until the ink stain is completely gone.
Step 4. Use toothpaste
Apply toothpaste (not gel) on the stained area and let it sit for 10 minutes. Wipe the sticky toothpaste with a damp cloth. Do not rub the toothpaste too vigorously so that the ink stains do not spread further.
Method 2 of 3: Using a Strong Cleanser
Step 1. Use a magic eraser
Magic eraser is a cleaning sponge with a micro-abrasive texture that can remove stubborn stains. You can use a magic eraser on any surface. Therefore, a magic eraser is a good option for removing ink stains that are stuck to the wall. However, the color of the wall paint may change slightly.
To use a magic eraser, wet it with water and then wring it out so it doesn't get too wet. After that, rub the magic eraser on the stained wall until the ink stain disappears
Step 2. Use a bleach pen to remove ink stains
If there are ink stains on the walls, you can remove them using a bleach pen. The bleach pen will lighten the stuck ink stains. This method can prevent discoloration of the wall paint.
To use a bleach pen, rub the tip of the pen against the stained area of the wall. The ink stain will disappear after a few minutes
Step 3. Use a bleach spray on a white painted wall
If the walls are white, you can use a bleach spray to remove the ink stains. This method is quite effective for removing the stuck stains. However, spray bleach may cause discoloration on non-white walls.
- To use it, spray this product on the ink stain directly. Leave it for a few minutes until the ink stain is gone.
- Bleach spray should be used as a last resort because it is very abrasive. In addition, spray bleach can also change the color of the paint.
Step 4. Try using alcohol
Dip a cotton ball in the alcohol, but don't let it get too wet. Position the cotton ball over the ink stain and gently pat it until the ink stain is absorbed. Change the cotton ball periodically until the ink stain is completely gone.
Previously, try applying alcohol to an invisible part of the wall. This is done to ensure that the alcohol will not cause any damage to the walls
Method 3 of 3: Protecting Wall Paint
Step 1. Deal with it immediately
The faster the ink stains are cleaned, the easier the cleaning process will be. If the ink stain still hasn't dried, you may just need to clean it with an easy method, such as using a damp cloth and water.
If the ink stains are already dry, don't worry! You can still clean it. However, the process may be more difficult
Step 2. Perform the test on an invisible part of the wall
You may need to test the cleaner used on a hidden part of the wall. This is done to ensure that the cleaner will not cause damage or discoloration. By doing a test, you can see if the cleaning method is correct or not.
For example, try a test cleaner that you will use on the wall behind the cupboard or near the floor
Step 3. Rub gently on a small area
So that the cleaner does not damage the wall paint, you only need to apply the cleaner to the stained wall. If the ink stain is not too much, you just need to pat the cleaner on the stain. Some tips you can try:
- Use a cotton ball or cotton swab to apply the cleanser.
- Slice the magic eraser into small pieces to apply on a small area.
- Rub the cloth or sponge in small movements.
Step 4. Prepare a spare wall paint with the same color
If after the ink stain is cleaned the color of the wall paint changes, you can repaint the part of the wall whose color has changed. Know the color of your walls and then buy a small can of paint of the same color. Apply paint on the surface of the wall where the color changes.
