Mosquito net windows are exposed to wind, water, rain, dust, dirt, insects and various other elements that can make them dirty in no time. Knowing how to clean wired windows effectively helps make mosquito net windows look well-groomed and last longer. Fortunately, the process of cleaning mosquito net windows is fairly easy and doesn't require a lot of product or preparation.
Step
Part 1 of 4: Getting Ready
Step 1. Remove the window wire from the frame
Before starting to clean the wire window, you must first remove it from the frame. This step allows you to clean it easily, thoroughly. Make sure the window wire is removed before you start the cleaning step.
- The best method for removing wire windows will depend on the type of window itself.
- Many wire windows have small tabs that can be pulled outward to release them from the frame.
- Be careful when removing them as many window wires can tear or tear easily.
Step 2. Find a suitable location to clean the window wire
After removing the wire window, transport it to a location that makes it easier for you to work. Choose a place where you can spray water safely. Make sure the length of the hose can reach the specified place. Once you find the right location, you can bring the wire window there to clean it.
- Make sure the work area is large enough to allow you to move around easily.
- The area selected should allow you to spray and drain water easily.
- You can place a wire window over a tarp to protect it from sharp objects or rocks.
Step 3. Prepare the cleaning solution
To make an effective cleaning solution, you'll need a bucket filled with ammonia and water. This mixture will break up any dirt, dust, or other debris that may have come into contact with the wire. A mixture of ammonia and water is the last thing you need before you start cleaning your wire windows.
- Mix household ammonia and water in a 1:3 ratio.
- If you don't have ammonia at home, you can use a mixture of warm water and mild soap.
- Don't forget to wear rubber gloves when you prepare or use this mixture.
- After pouring the ammonia and water into the bucket, stir the two ingredients to mix well.
- You can also use mild dish soap if you can't find ammonia in your home.
Part 2 of 4: Cleaning the Wire Window
Step 1. Spray the window wire with a hose
The first step to cleaning windows is to spray them with a garden hose. Spraying will remove most of the dirt and dust that has stuck to the surface. Make sure you spray the entire surface of the wire before brushing it with the cleaning solution.
- Start working from the top of the window downwards while spraying water all over the surface.
- Choose a hose setting with the softest jet of water so as not to damage the wire.
- Flip the wire window to spray the reverse side.
Step 2. Wash the window wire with a mixture of ammonia and water
Once the wire is rinsed with water, you can start cleaning it with a cleaning solution. Use a soft-bristled brush to brush the wires using the cleaning solution. This step will allow you to break down and remove any hard-to-clean dirt. Brush the entire surface of the wire and make sure you can remove as much dirt as possible.
- Use small circular motions when brushing the wire.
- Gently brush. Brushing too hard can tear the wire.
- Rinse the brush after cleaning an area to prevent dirt from sticking to the wire again.
- Clean both sides of the wire window.
Step 3. Clean the remaining dirt with a sponge
Brushing the entire surface of the wire with the cleaning solution will remove most of the dirt. You can deal with any remaining dirt by wiping it off with a sponge. The sponge helps to absorb dirt and residual cleaning solution so that the wire window is free of dirt.
- Don't forget to wipe the window frame.
- Now you can perform a check to make sure no areas have been missed.
- Wipe both sides of the wire window.
Part 3 of 4: Drying and Replacing the Wire Window
Step 1. Rinse the wire window
If you are sure the wire window is fully clean, continue with the final rinse. Use the hose again to gently spray any remaining cleaning solution or dirt that is still attached. Make sure you rinse the wire windows thoroughly before drying and reinstalling them.
- Do not use high-pressure jets or high-power settings for hoses.
- Make sure you have sprayed the entire surface of the wire, from top to bottom.
- It is recommended to rinse both sides of the window.
Step 2. Let the window dry
If you are satisfied with the condition of the windows, allow sufficient time to dry them before reinstalling them. Here are some tips to help dry wire windows quickly and thoroughly:
- Wipe the wire window with a dry cloth or towel.
- Try shaking the window wire gently to get rid of excess water.
- Lean the wire window against the wall so the water can drain down.
- Dry the wire window in a place that is exposed to direct sunlight to speed up the drying process.
Step 3. Put the wire window back into place
Once the wire windows are dry and you're satisfied with how they look, it's time to put them back in place. You can mount the window by following the steps reversed from when you removed it. Make sure you install the windows securely to get the job done.
Part 4 of 4: Keeping Mosquito Wire Window Clean
Step 1. Clean the dust at least once a week
To keep wire windows clean, you must take steps to prevent the accumulation of dirt and dust. Cleaning the dust that sticks to the glass windows once a week will make your job easier. Apply these basic techniques to stick to a weekly cleaning schedule:
- Take a vacuum cleaner and a brush-shaped muzzle.
- Use a vacuum cleaner to gently suck up dust and dirt.
- If possible, clean both sides of the window.
- It is recommended to work from the top down.
Step 2. Clean the stain on a specific area if needed
You don't always have to remove the entire window wire to clean it. If it goes wrong or the area looks dirty, you can prepare a mixture of soap and water to clean the wire windows. Keep these tips in mind for cleaning specific areas of windows:
- Mix mild soap and warm water in a bucket.
- Dip a small sponge in the bucket.
- Use a sponge to clean the stained area.
- If you must brush, do so carefully. Brushing too hard can tear the wire.
- Finish the job by drying the windows with a towel.
Step 3. Clean the wire windows regularly
The more often you clean wire windows, the less likely you will have to remove the windows to clean them thoroughly. Try including wire windows in your regular house cleaning routine to keep them looking like new.
