Vans skates can be tied in a variety of ways, including basic cross ties and neat row ties. You can learn both ways, as well as some basic tips for tying your laces and caring for your Vans shoes in this article.
Step
Method 1 of 3: Row Ties
Step 1. Count the number of eyelets on the shoe
Vans with an even number of eyelets can be cross tied. If you have an odd number of eyelets, the same principle applies, but you'll need to make some adjustments.
Step 2. Insert each end of the rope into one of the two bottom eyelets
Now the string will form a line running across the bottom, with the ends pointing inward. Keep the left end of the rope on the left, and the right end of the rope on the right.
Step 3. Insert the right end of the lace from under the shoe so that it pops out of the second eyelet on the right
Hiding the shoelaces on the inside will make this technique look unique.
Whichever you wear, your right or your right shoe, it doesn't matter. Most importantly, stay consistent so that the end result is the same
Step 4. Insert the left end of the lace from under the shoe so that it pops out of the third eyelet on the left
There is now an empty eyelet on the left between the first row of rope and the end of the rope sticking out.
Step 5. Cross the right end of the rope towards the left and insert it into the second eyelet
There are now two rows of strings and both strings are on the left.
Step 6. Cross the end of the rope that comes out of the third eyelet to the right, then insert it into the third eyelet on the right
There are now three rows of laces and each laces is on either side of the shoe.
Step 7. Continue repeating this pattern
Insert the left end of the lace from under the shoe, so that it pops out of the fifth eyelet on the left. Then, thread the right end of the lace from under the shoe, so that it pops out of the sixth eyelet on the right. Cross each end of the rope and thread it through the next eyelet on the opposite side to form new rows of rope.
If the shoe has more than six pairs of eyelets, repeat the above steps as needed, crossing in the opposite direction each time two rows of laces have formed
Method 2 of 3: Crosslinks
Step 1. Thread each end of the rope downward through one of the bottom eyelets
Press both ends of the rope through the holes closest to the toes. Now the rope will form a line running across the bottom, with the rope pointing inward. Pull the ends of the rope up through the row, then down toward the toes.
Step 2. Cross the right end of the rope towards the left
Insert it into the second eyelet upwards. The right end of the lace will now cross the tongue of the shoe, while the left end will appear between the row and the cross of the laces. Pull the crossed laces to the left (away from the shoes) so as not to interfere.
It will be easier to do this if the shoes are removed and positioned facing you. Whichever you wear, your right or the right shoe, it doesn't matter. Most importantly, stay consistent so that the end result is the same
Step 3. Cross the left end of the rope over to the right, then thread it through the second eyelet, just as you did on the other side
Now you have one more row and two rope crosses. Pull the last crossed laces to the right (away from the shoes), so as not to interfere.
Step 4. Continue tying the rope with this pattern
Start by crossing the right end of the rope over to the left and then thread it through the next eyelet, making sure that the other end of the rope sticks out between the two crosses. Pull the latest cross of rope so it doesn't interfere, then cross the left end of the rope over to the right. Repeat this repeatedly until the entire shoe is attached with laces.
Lacing in this style ensures that one cross direction will always be above the other cross direction. For the other shoe, make sure you make the crosses in the opposite direction, so that the crosses of the two shoes appear opposite to each other
Method 3 of 3: Basic Bonding
Step 1. Keep the shoelace untwisted
Straight, flat laces are classic Vans shoes, so keep the laces tidy. To keep your Vans looking fresh and new, keep the straps as straight as possible.
- Whenever you pull the rope through the eyelets, make sure to flatten it out and prevent it from twisting. Do it slowly.
- Do not be too tight when attaching the rope, because the rope can look bulging and look uneven, if the rope is actually quite straight.
Step 2. Take off your shoes and place them facing you
It's much easier to lace up if the shoes are removed and positioned facing you, not the other way around. To make the laces look right, remove your shoes and position them so they are facing you.
Step 3. Use thick white rope
Vans white laces are usually the best laces for Vans, but any type of white sneaker laces can be used. In general, skate shoelaces are fairly puffy and white, while some basketball shoelaces can be very thin and cylindrical, and other shoelaces can be lighter.
Of course you can use any color, but the new white strap is the one most often associated with Vans
Step 4. Change shoelaces periodically
Fresh laces will keep your shoes looking cool all the time. It's a good idea to change the strap every few weeks, especially if you use it regularly and break the strap, or cause it to scuff.
Step 5. Change the way you lace your shoes
To get the most out of your shoes, it's a good idea to change the way you tie your shoes, so that the laces don't wear out due to the constant tying style.
- If you're tying a row of shoes, replace it occasionally with a cross tie to keep it looking brand new
- If you're tying a Vans cross, change the direction of the cross so that the right side isn't always over the left, or vice versa. This will help keep the shoes from wearing out unevenly.
