Grout can easily become discolored and dull over time – something a lot of people don't like. Instead of getting annoyed with unattractive dark stains between your tiles, you can change the color of your grout. Even if it's not on time, you can choose to color your grout or give it a thorough cleaning.
Step
Method 1 of 2: Coloring Your Grout
Step 1. Choose a grout color
Generally, people choose to color their grout because it has lost its luster and now looks brownish and dull. Instead of going back to the original color, look for a new color to cover up blemishes and blemishes. While it may sound strange, a similar to earth color grout is usually the most successful, as you won't have to worry about the grout changing color again over time.
- A light grout color can blend in and hide the shape of your tile, while a dark grout color makes your tile stand out and stand out.
- If possible, look for a grout dye that is also a grout coating, so you can skip the final step of grouting.
Step 2. Clean the tiles and grout
Get out your cleaning tools and grab some lubricating oil, because before you can start coloring your grout, you'll need to clean the grout thoroughly. Use liquid bleach to kill any mildew or mold that could be causing the problem. While it may be uncomfortable, use a damp sponge/brush to clean the grout and tiles, even if the mold and mildew are on the floor. You can't use grout dye on wet grout, so wait 30 minutes or more after cleaning it to start the staining process.
Step 3. Use the grout dye
Some grout tools come with a small paint brush, but if you don't have one, just use a stiff, very small bristled brush for coloring. Dip the brush in the grout dye, and be careful to color only the grout. The color is permanent and cannot be removed from your tile once it dries, so be careful when staining the grout lines and removing stains from the tile.
Step 4. Add additional layers
Depending on the look you want, you may need to add more than one coat of grout dye. If so, wait at least 24 hours for the first coat to dry, and then carefully stain the second coat of grout dye. Again, be careful not to accidentally hit the dye on the tiles as they are very difficult to remove.
Step 5. Coat the grout
Some grouts are a mix of grout and grout coatings, but you'll usually need to use a special oil coating to finish your grout. This is especially important for places that come into contact with water frequently (such as in the bathroom or near the kitchen sink). Follow the directions that came with your grout coating as you color the grout.
Method 2 of 2: Cleaning Your Grout
Step 1. Choose a cleaning agent
Grout, especially between floor tiles, can turn dull and dirty over time. Depending on the severity of your grout discoloration, you will need to use a different cleaning solution. For a light discoloration, use a combination of baking soda and hydrogen peroxide to form a cleaning mixture. For more severe discoloration, use oxygen bleach to bleach your grout.
Step 2. Do the initial cleaning
So that you don't go the extra mile when you start scrubbing the grout, do a light cleaning of your grout before deep cleaning. Use a mixture of bleach and water to kill mold and mildew, and remove any mildew or dirt that may have stuck to the surface.
Step 3. Use your cleaning tool
Work on small sections of tile/grout (try 30.48 cm at a time), using your cleaner on the grout. Leave it for 3-5 minutes, as this will make scrubbing easier.
Step 4. Start scrubbing the grout
Use a new toothbrush (an electric one is preferable) to scrub away dirt and discoloration in the grout. It's relatively time consuming, so don't give up if you don't succeed at first. Use clean water and a rag to wipe off any remaining cleaner, and apply another coat of your cleaner if necessary.
Step 5. Continue cleaning your grout
Do this by rubbing it away from your starting point, using the previous process. Add the cleaner to the patch, leave it on, and scrub until the grout underneath is bright, clean, and shiny.
Step 6. Finish it
When you're happy with your freshly cleaned (and stained!) grout, you can do a final clean to remove any remaining cleaner. It's good to apply a coating to your grout once a year, so when doing so use a special oil coating to protect your grout.
