A staple gun is a hand machine that can nail metal staples to plastic, wood, and heavy fabric. The staple gun can glue materials and shape anything from objects to flat surfaces. Manual and electric staple gun models are available. This stapler is much stronger than the regular office stapler. The staples used are heavyweight and are stronger and thicker than regular staples, and you will need to use more force to nail them to the materials you want to combine. Fill the staple gun with the right staple gun, and let it do its job on insulation, upholstery, or whatever else you need to work on.
Step
Step 1. Make sure the stapler is locked
If the stapler is electric, make sure the cord is unplugged. This is the easiest way to ensure that you are safe when using the stapler.
Step 2. Locate the trigger button
Manual and electric staplers have a trigger button, usually located on the back of the stapler. Sometimes this button is easily recognized as a rubber-covered gripper. Often located at the end of the handle of the stapler.
Step 3. Press the trigger
Squeeze the trigger button until the receptacle slides out or down and the latches can be seen.
Step 4. Turn the staple gun over
Make sure the stapler is held upside down for easy filling. Insert the stapler upside down into the slide case. Mistakes are often made at this stage, when people try to fill with staples that are facing the wrong way. The stapler should go in with the flat end first and the sharp edges sticking up.
Make sure the stapler you use is the right size. If it's too big or too small, the stapler can clog the stapler. Select the stapler staple for the stapler brand and model you are using
Step 5. Insert the stapler into the staple gun
The stapler should fit snugly, but don't forcefully add more if there's no space left. All fixing staples should be straight and consistent with each other. There should be no staples sticking out or tilting to one side.
Step 6. Close the staple gun case
Push the container containing the staple clamp back into place. Listen for a click to make sure the case is firmly seated in place.
Step 7. Test the staple gun
Make sure no one is standing near you. Gently squeeze the trigger under the stapler handle to make sure the stapler snaps out properly. If it gets stuck or does not work, remove the case again to double-check the fasteners and make any necessary adjustments.
- Manual staplers require more pressure to activate than electric staplers, so make sure you take that into account when testing.
- If you squeeze the trigger too quickly, the stapler may slide out of place.
Tips
- Check the staple gun case for loading instructions. Some models may have special directions that can be helpful when filling the stapler of the clamp.
- Wear safety glasses. There will be less chance of your eye getting hit by a killer staple.
