Many people find that removing leg hair using an epilator can be a great alternative to using a razor or wax (waxing). The epilator machine is able to pull the leg hair down to the root. Hence you will have smooth feet for about six to eight weeks. The results you get will be the same as waxing results. The difference is, by using an epilator you don't have to clean up the mess after shaving. You won't spend a dime either. Learn how to use the correct epilator to get good results without experiencing significant pain.
Step
Part 1 of 3: Prepare Your Feet
Step 1. Choose an epilator with good quality
The quality of the epilator certainly matters. Choose a brand that is trusted, well known, and has positive product reviews. Cheap epilators may not work as well and are more painful to use. Since you'll be using an epilator for a long time, spending more to buy a good epilator probably won't be worth it.
- Look for an epilator at a beauty supply store. For a better option, look in online stores. Choose an epilator that has a lot of positive product reviews.
- If your epilator is wireless, make sure you fully charge it before you start shaving. Don't let your epilator suddenly turn off while you're not done.
Step 2. Shave your legs one to three days before plucking the hair with an epilator
Epilators can work well on hairs that are only a few millimeters long. If your leg hair is too long, it will likely tangle and curl on the epilator. If it is too short, the rotating head of the epilator will not be able to remove the hair. Shaving a few days before using the epilator is the best way to make sure your leg hairs are the same length and ready to be removed with the epilator.
Step 3. Set aside at least an hour for your first session
Once you get used to the process, you may be done in half an hour. However, for the first session, you usually need a lot of time. The process is certainly safer than regular shaving, but the results will last longer.
- Many people like to pluck hair with an epilator at night. Your feet will be red and slightly swollen when you're done, but will be back to normal when you wake up in the morning.
- It is not recommended to use an epilator on important days or dates, unless you plan to wear tights or other types of pants. Get your hair plucked the day before so your feet don't look red and swollen when they come out.
Step 4. Use painkillers before you start
This is optional, but many people find painkillers (according to the recommended dosage) to reduce the effects of pain. Hair removal with an epilator is like waxing; It hurts at first, but after a while you will get used to it and even enjoy the process.
Step 5. Exfoliate your feet under the shower
Exfoliating dry skin can prevent ingrown hairs later in life. Turn on a warm shower and then exfoliate your skin using the gambas plant fiber or scrub. Rub your skin in circular motions so that the dead skin is gently exfoliated.
Step 6. Decide whether you will pluck wet or dry hair
Some people like to pluck their hair when they shower. The heat generated from the warm water makes the process less painful. As for those who prefer to pull it dry. The epilator can pull the hair more firmly so it works more effectively in dry conditions.
- If this is your first time, you may want to pluck wet to keep your skin moisturized. Try shaving in a shallow warm tub (make sure you don't drop the epilator!). Use the shower gel on the surface of the skin of your feet so that the epilator moves smoothly.
- If you want to shave dry, make sure your skin is completely dry. The drier your skin is, the more grip the epilator will grip your leg hairs. Damp hair will become slippery and sticky, making the removal process more difficult. After exfoliating, dry your feet and dust them with baby powder before you start plucking.
Part 2 of 3: Using the Epilator
Step 1. Use the lowest setting first
Many epilators have two settings: low and high. When you start for the first time, use a low setting until you get used to the sensation of plucking your leg hair with the epilator. Once you get used to the sensation, you can turn it to a high setting to speed up the process.
Step 2. Start on the inside of your lower leg
This part is the least sensitive part. That's why it's the best part to start with until you get used to the sensation. Avoid starting near the elbow or above the bone, as these are more painful to shave. Finish off the most sensitive areas until your body gets used to the sensations.
Step 3. Hold the epilator close to the skin surface but do not apply too much pressure
Gently run it over the surface of your skin. Do this in a circular motion around the area you want to remove the hair from. The twisting tip of the epilator will grab and pull on your fur. It takes about 30 seconds to pluck the hair in the area in question.
- Run the epilator against the direction of hair growth. Pay close attention to where your leg hair is growing.
- To make it easier for the epilator to catch your hair, use it in a direction against the direction of the hair growth so that the hair is in a standing position.
- You will certainly feel a pinching sensation and your feet will bleed a little. There's nothing wrong if you want to stop for a moment.
Step 4. Do it slowly to make sure the epilator hits the hairs you want to remove
The epilator works well in slow motion. Be patient as the epilator gently plucks the hair. Do it repeatedly until the fur is completely pulled out. If you do this quickly, some of the hair may be missed or unplucked.
Step 5. Switch to a higher setting when you are used to the sensation
By using a high setting, you can perform the removal a bit faster and in less time. If the stinging is gone and you're getting used to it, then continue removing it and changing it to a higher setting.
Step 6. Apply skin moisturizer on your feet when you're done
Use an aloe cream or moisturizer to soothe your red, irritated feet for a few hours. When your feet are no longer swollen and red, your feet will feel smooth and hair-free.
- If your foot becomes very swollen, use an ice pack to soothe it after you're done.
- If some areas bleed, clean the area and apply a plaster.
Part 3 of 3: Starting a Habit
Step 1. Clean the epilator after each use
If your epilator gets wet, you can clean it under running water. If you use it dry, clean it with alcohol or the cleaning tool provided by the epilator. This is done to prevent the epilator from getting clogged and also to sterilize it when you use it again in the future.
Step 2. Do the depilation several times a week
Leg hair grows gradually. You may notice your leg hair growing back after a few days of removal. Within a week, you may want to pluck your hair two or three times to remove all the hair. after that your leg hair will look smooth for a few weeks until it's time to pluck it again.
Step 3. Make repairs whenever you want
If you notice any hair growing prematurely, it's time to pluck the hair out (in its entirety), then it's okay to make a repair by plucking it. The process is the same as a regular session. Also make sure the epilator is cleaned again when you're done. After a few months you will notice that your leg hair is growing slowly and repair is not necessary.
Step 4. Apply the epilator to the rest of the body
Epilators are fine for use on the feet, but you can also use them on some of the more sensitive parts of your body. If you enjoy the process and are happy with the results when it comes to plucking your legs, try using an epilator on your arms and underarms as well.
