How to Create Auxiliary Ties (with Pictures)

2024 Author: Jason Gerald | [email protected]. Last modified: 2023-12-16 10:50

Bantu ties* are a traditional, flirty and cute hairstyle, worn by African women from certain cultural groups and some women of African descent, but they are also great for all hair types. Actually, Bantu ties are not strictly "tie" because they are actually small loops tied around the head. However, if you untie your Bantu knots after you put them on, you can create a curly hairstyle known as a Bantu knot-out. Here's everything you need to know about how to create the two styles of Bantu ties above.

The use of the word "Help" in this article is not intended to offend anyone. Sorry if there are parties who are offended by the use of these terms

Step

Part 1 of 3: Preparing Your Hair

Step 1. Wash your hair

Your scalp should be very clean as most of your scalp will be visible after you put on the Bantu bond. If you leave too much hair product residue, dirt, and flaky skin on your scalp, this Auxiliary bonding style can itch and become less glamorous.

You don't need to use a special shampoo in making Bantu bonds. Just use the hair care products you normally use when washing your hair

Step 2. Use conditioner, if necessary

If your hair is easily tangled or unruly, use a conditioner that can prevent this. You can choose a rinse-off conditioner or a conditioner that is left on your hair.

It is recommended that you use a rinse-in conditioner if your hair dries easily, but does not stand up unruly, while if your hair is dry and frizzy during use, it is recommended that you use a conditioner that is left on your hair.
Whatever conditioner you use will provide a protective layer for your hair that can prevent damage to the hair when you curl, twist, and make it into knots.

Step 3. Straighten the tangles in your hair if needed

If your hair tangles easily, you may want to comb it with a comb that can straighten tangles.

This step is not necessary if your hair is easily straight and frizz-free.
Removing tangles from your hair helps you to make the Bantu knots and loose knots soft and shiny.

Step 4. Partially dry your hair

There are conflicting opinions about whether you should work with wet, damp, or dry hair, but in general, almost everyone agrees that damp hair is best used for Bantu ties and untied Bantu ties.

Dry hair tends to be more difficult to style, and Bantu ties and loose Bantu ties may not last as long if your hair returns to its original shape a few hours after curling.
Wet hair that's still dripping won't dry out when tied, and Bantu ties and untied Bantu ties will become limp because they're still wet.
As a general rule of thumb, the goal of towel drying hair is to make it feel damp to the touch but no longer wet enough to wring out.

Part 2 of 3: Making Auxiliary Bonds

Step 1. Divide your hair into sections

The width of each section can vary depending on how short or how long your hair is, as well as depending on the look you want if you plan to make a loose Bantu tie. If you have short hair, you should divide your hair into smaller sections, while if you have long hair, you can make larger sections. Usually, the larger the section of hair you use, the bigger the curls.

A sasak comb is usually the best tool to use for dividing your hair. Divide your hair into equal, separate sections using the tip of the comb.
If you have short hair, make sections of your hair about 1 cm or less wide.
If you have long hair, you can divide your hair about 7-10 centimeters wide.
If you plan to make a loose Bantu knot, consider the final texture of the curl you will create when you determine the width of your section of hair. For wavy hair, use medium to large ties ranging in width from 4-8 centimeters. For a more defined curl, use small knots ranging in width from 2.5-4 centimeters.

Step 2. Use a curling cream or other similar product

Use a product that gives light to medium curls to make the Bantu bond and Bantu bond loose so that the bond stays in shape without becoming stiff. Use the product for each section of hair.

Run the product into your fingers and slide each section of hair you've formed between your fingers while twisting, starting from the roots of the hair down. This method allows you to use the product while forming the initial "string" of your hair to then form into a knot.
Remember that you need to keep the twist strength of your hair high enough to maintain the shape of the bond.

Step 3. Make a small loop at the base of your scalp

Twist each section of hair a few times between your fingertips, as if you were turning a screw in or turning a doorknob. Wrap your hair in a short loop like a small loop over your scalp.

Don't twist your hair all the way through at this stage. It's okay to twist a small loop through your hair, but twisting the entire section of hair into a knot will cause serious damage to your hair

Step 4. Roll up the remaining hair

Gently twist the remaining hair around the base of the bun, bringing your hair close to your head with each layer curled.

When you use longer hair to form Bantu ties, these ties will look like pyramids or funnels. If you use short hair, the knots will look like rosebuds or like French bread (baguettes).
The ends of each section of hair should be as close to your head as possible to hold the knot in place more effectively.

Step 5. Tie your hair into knots, each in its place

If your bun is tight enough, you can usually tuck the ends of your hair under the loop to hold the knot in place. If your loop feels a little too loose, you can use a bobby pin or hair band to hold the ends of the knot in place.

If you have naturally curly hair, you can usually tuck the ends of your hair. However, if your hair is fairly straight, you may need to use bobby pins or a hair band

Step 6. Repeat the Bantu bonding procedure on the remaining sections of hair

Each section of hair needs to be twisted into a small loop. Wrap the rest of the hair around a suitable loop and pin or slip hairpins at the ends of the hair in their respective bunk places.

Remember that you must use the same hair product on each section before starting to twist and form the knot in place.
If your hair starts to get dry as you work, you can squirt a little water from a spray bottle to keep it damp.

Step 7. Wear your Help tie with pride

The Bantu bond has its own style. Now, your Bantu binding is complete so you can wear it around town however you want.

If your Bantu knot comes off after you've finished making it, you can form a curly hairstyle known as a loose Bantu knot

Part 3 of 3: Making Auxiliary Bonds Loose

Step 1. Wear a shower cap overnight

If you plan to make the Bantu knot loose, let your hair dry on its own. Using a shower cap overnight to cover the knot Your help can make the surrounding hair moist and steamy so it can help shape your hair naturally.

Wearing a shower cap creates a kind of “greenhouse effect”, so your hair dries as slowly as possible while retaining moisture to prevent hair from losing its shape.
After removing the sleeping cap, your hair will still feel a little damp. Let the wind dry for about 15 minutes and then squeeze your hair.

Step 2. You can also dry your hair using a hair steamer (if you have one)

If you need to dry your hair quickly, another great option is to sit under a hair steamer and let your hair dry under warm, constant heat for 30-60 minutes.

Don't dry your Help bond. Drying the Bantu ties can cause your hair to become too frizzy when untied

Step 3. Remove each coil carefully

Remove your hairpins and any ties. Your coil should be tightly twisted after this stage.

As you let go of your hair, apply some anti-moisture oil or serum to your hands. Oils and serums prevent friction between your hands and hair that can make your hair too frizzy.
Each knot should be untied as gently as if you were removing a headgear. Don't pull your ties right away.

Step 4. Loosen each twist gradually

Gently separate each curl using your fingers. To minimize curling, you can gently run a small amount of the product with your fingers as you loosen each twist.

You can also use a wide-toothed comb if you don't use your fingers.
Avoid playing with twists too often. If you hold your hair too often at this point, your hair can become too frizzy easily.
Avoid pulling every section of hair. Instead, make your hair fuller and softer. Arrange your hair so that your curls look natural and your scalp is no longer visible.

Step 5. Spray your hair with a hairspray or similar product if needed

A little spray or hair oil can help prevent hair from standing on end while giving your hair a smooth, shiny appearance.

Finally, your loose assist ties are ready to be worn around town

Step 6. Keep your curls at night

At night, it's a good idea to pin your hair and wrap it around with a scarf. When you wake up in the morning, remove your pins and reshape your curls using your fingers.

Use a satin scarf or wrap your head at night for maximum results.
We recommend that you sleep on a satin pillow so as not to damage your hair as much as possible.
If you want to maintain the appearance of your hair for a week or two, clean your scalp with a hair care product or other substance every three or four days while doing this procedure at night to keep your curls looking great.