6 Ways to Install a Hammock on an Apartment Balcony

Step 1. Yes, this usually doesn't cause any problems

How to install the crib will depend on the rental agreement and the regulations in your apartment. Some apartments allow you to drill into walls and ceilings, while others don't. Fortunately, although you're not allowed to drill into walls, there are other options to choose from.

Ask the apartment manager to make sure what you can and can't do in the apartment

Question 2 of 6: How to install a hammock without having to drill holes?

Step 1. Attach the hammock to the stand

The stand will make it easier for you to set up the hammock and lay back comfortably there. All you have to do is assemble the stand. You don't need a stud finder (a device for finding studs), pilot holes or special hooks.

You can buy a hammock stand for around IDR 1,400,000. However, the cost of this amount is worth the benefits if you often relax in a hammock. You can buy it online or at a building/home supply store

Step 2. Attach the hammock to the balcony roof joists

Prepare a hammock rope, which can be purchased at online stores for less than Rp. 200 thousand. Wrap and secure the two ropes at 2 different points along the roof joists. Next, attach the strings to the karabiners (metal hook rings commonly used by nature lovers) or S-shaped hooks. Connect the karabiners or hooks to each end of the hammock to complete the installation.

Make sure you check with the building manager before hanging anything on the roof joists. They will tell if the beams are strong enough to hold up the hammock

Step 3. Install the hammock between two vertical beams or posts

If your balcony is built with beams or posts, check with the building manager if the beams are safe for a hammock. If the posts are sturdy enough, wrap the rope around two separate posts. Use a carabiner or S-shaped hook to connect the rope to the hammock.

The process is almost the same as when you install a hammock in the middle of 2 tree trunks

Question 3 of 6: How to install a hammock using a drill?

Step 1. Locate and mark the 2 studs along the wall

Studs are supports that are embedded in the wall. the hammock should be mounted on 2 studs for added safety. Move the stud finder (which can be purchased inexpensively at a hardware store) along the wall, gently guiding it in a horizontal line. If the device beeps or flashes, move the device to locate the exact stud position. After that, mark the studs with a pencil.

Choose studs that are approximately 3-5 meters apart. If possible, allow at least 3 meters of space for you to comfortably stretch your hammock

Step 2. Use a drill to make guide holes in the stud marks you made

The guide holes are the pre-drilled holes to prevent the wood frame from breaking. Make holes in each stud mark before installing additional hardware.

You can make guide holes with a 9mm drill bit

Step 3. Install the eye bolt on the wall

Install the eye bolts in each of the guide holes and turn them tight and tight. An eye bolt is a type of bolt that has a loop at the end, which is used to hang a hammock.

Step 4. Attach the hammock to the eye bolts

Attach the end of the hammock to the eye bolts using a rope or chain. Double-check that the hammock is firmly and securely attached to each eye bolt. Now, you can relax and lie down comfortably in the hammock attached to your apartment balcony.

Question 4 of 6: How high should the hammock be placed?

Step 1. Install the hammock about 1.5 to 2 meters from the floor

This allows the hammock to hang comfortably without touching the floor. If the hammock is wall-mounted, mark the studs at least 1.5 meters off the floor.

If you are using a stand, follow the manufacturer's instructions for adjusting the height of the hammock

Question 5 of 6: Can I mount the hammock on metal studs?

Step 1. Wooden studs provide greater security

Many buildings use wooden studs and are supported by wooden planks, which can safely support the hammock hardware. Unfortunately, metal studs cannot withstand too much weight, and are not ideal for hanging hammocks.

Some modern apartments may install metal studs. To be on the safe side, check with the building manager about this before you install the hammock

Question 6 of 6: What if the balcony is very small?

Step 1. Mount the hammock to the ceiling

The process is almost the same as when you mount the hammock on the wall. Look for the studs along the ceiling, then screw the eye bolts there. After that, attach the hammock through the eye bolt.

You can place two hooks side by side to create a kind of "swing" of the hammock