Slender Man, a fictional character originally created as an Internet meme, continues to haunt the imagination of many. If you're going to a costume party or playing the role of Slender Man, you're definitely going to need a mask to complete your scary formless face.
Step
Method 1 of 3: White Stockings Version
This version is easy, although it will likely look less effective than the other versions, especially if it's pulled too tight and shows your face clearly. Try to use stockings or tights made of thicker material for the best look. On the plus side, this version tends to be easier to use to breathe from within and to see out!
Step 1. Buy white stockings
These are usually available at drug stores, pharmacies, convenience stores and online. Large to extra large sizes will provide the most fabric materials to use.
Step 2. Place the ends of the waist above your head
The mask needs to be extended all the way down to the shirt, so you'll likely feel that you need to tuck your head into one of the stockings' legs, to make sure that it reaches your neck as well.
It is best if you are already wearing a shirt while wearing the mask. That way, you can ensure that the stockings are of adequate length
Step 3. Have a friend tie the legs together around the back of your head, while the waistband fits comfortably around your head and neck
Step 4. Make the knot as tight and secure as possible without causing pain to the wearer
This part needs to be secured, as the fabric will unravel once it's cut and the knot will prevent this from happening to the mask.
Step 5. Next, cut off the excess leg
This piece can be used for crafting with other stockings, so add it to your crafting box.
The knot should be as simple as possible - you can also secure the knot with clear tape
Step 6. Add the rest of the costume
Finished!
Method 2 of 3: The Stretchy Mask and Cloth Version
Step 1. Buy a plain white face mask
Use the kind found in costume stores and dollar stores, that cover your face but have eye holes, mouth holes and nostrils. This mask will keep the cloth from sticking to your face, helping you to breathe and see.
Try the mask on for convenience. If it doesn't feel comfortable, make the necessary adjustments before gluing the fabric, as this will be difficult to do afterwards
Step 2. Find some white fabric that stretches well
Lycra, spandex etc., are good options, but if you're not sure, check with a fabric retailer who may be able to offer several options once they understand what you're trying to do.
Step 3. Cut the fabric slightly wider and longer than the mask
Attach the fabric to the mask by smearing the perimeter with glue, attaching the edges of the fabric to the back of the mask, starting from the top of the mask to the bottom. A hot glue gun will make this easier to do, but be careful not to melt the plastic if the mask is plastic.
- When you glue it, keep the fabric tight (stretched), so it doesn't fold. Check to keep the fabric smooth - wrinkles will spoil the final look.
- Be sure to work around the elastic part that holds the mask to your head––the part should still be able to stretch normally.
Step 4. Make the back
This is the piece that hides the back and sides of your head, and joins the front of the mask, completing the mask.
- Place the mask on a wider and longer piece of fabric.
- Draw an oval or circle around the mask, at least about 10cm from the edge of the mask to the circumference. Draw a circle or oval shape, with a bit longer for the part that goes down to the neck (the part that folds into the shirt). The back fabric should be large to ensure it fits snugly. Use your own head measurement as a benchmark for the final measurement.
Step 5. Glue the back to the mask
Glue the top edge of the back (the end opposite the part you defined as the neck end) to the back of the mask behind the forehead.
Continue to stick the sides of the mask up to the chin. This completes the back; the remaining length that is not glued at the base will be inserted into the neckpiece when assembling the mask
Step 6. Make small holes in the eye area
This part is not important if you find that you can see through the fabric, but test it first to see through it. Only do this if you can't see through the fabric. If there is a risk that the fabric will move after being punched, glue the edges of the circle with glue or sew around the edges with an invisible thread (a job that requires a lot of precision).
Step 7. Make a neck cover (dickey or faux shirt front)
Cut a piece of stretchy white fabric, wide enough to go around your neck and cover the neck to the collar of the shirt. Glue this piece into the stretchy tube
Step 8. Cut a leg from a pair of white stockings
This section covers the other two sections to smooth out the entire look.
Step 9. Put it all together
To put it on, simply add the separate items as follows:
- First of all, put on the mask. Adjust for comfort.
- Next, wear a neck cover or dickey. Press into the neckline and tuck the ends under the shirt.
- Finish with the leg of the stockings. This should cover both the mask and the neck cover, to give it a smooth finish.
Step 10. Done
Go out and scare your partying friends.
Method 3 of 3: Full Suit Version in White
This option may be expensive, hot and a little overwhelming, but it can still be an option. On the plus side, if you're planning to scare on a cold day, it's likely to keep you comfortable.
Step 1. Buy a full white suit
Make sure the suit includes the part of the head where the eyes or mouth have not been cut.
Step 2. Put on all the settings
Then put the Slender Man suit on it. And that's it, your mask is the only remaining part, which is not covered by the suit!
