Owl from origami is not a difficult thing. You just need to follow the steps written in the following instructions.
Step
Step 1. Make a square of paper or you can skip this step if you already have one
To make square paper, you must first have rectangular paper.
Step 2. Start with a square sheet of paper with the colored side facing up
Fold it in half diagonally, then unfold. Do the same thing in a different direction.
Step 3. Turn the paper over so you get the white side
Fold it in half horizontally well and unfold. Fold it again in the other direction.
Step 4. With the creases you have made, join the top 3 corners of the model to the bottom corners
Flatten the folds.
Step 5. Fold the two wings (left and right) which are triangular to the center
Step 6. Fold the top of the model down nicely and spread it out
Step 7. Open the top cover of the model, pull it up and press the sides of the model inward at the same time
Flatten and fold well.
Step 8. Repeat the previous step on the other side
Step 9. Fold the front and back wings down
Step 10. On the top layer, fold the top corners to the center line, and repeat the same on the back
Step 11. Make the wings by lifting the inner folds and twisting them forward, then pressing them down
Repeat this on the other wing.
Step 12. Fold the top corner of the model down as shown
Step 13. Fold the corners up again as shown
Step 14. Fold the entire top corner down with the previous fold as shown
Step 15. Done
Warning
- This origami owl is fun to make, but can be a little tricky with the folds.
- Make your folds well, or your entire fold will be wavy and not look like an owl.
- You must follow all instructions. Even if you just skip a step, you'll have to start all over again!
