It's easy to sync or pair a Plantronics audio device with a mobile device, such as a phone or tablet via Bluetooth. To find out how, see step 1.
Step
Step 1. Make sure that the headset is fully charged
Depending on the headset model you're using, the power light should be solidly on-or the light should stay still and not blink-when the headset is fully charged.
Depending on the model of the Plantronics headset you have, you will hear a single tone every 15 seconds if the battery is getting low, or the power indicator light will flash
Step 2. Turn on the headset
There are several ways to pair a Plantronics headset, but all require you to first press the Power button to turn it on, and this button is easy to spot. Do this by inverting, pressing, or sliding the switch until it is ON.
Step 3. Enable Pairing mode
The way to activate Pairing mode depends on the headset model.
- If your headset has one multifunction button, then start with the headset off position, then press the button and hold it for 5-6 seconds until the light starts flashing.
- If your headset has an On and Off switch, then press and hold the Call button for 5-6 seconds until the light comes on.
- For headsets with On and Off buttons, start with the headset in the off position, then press the Power button and hold it for 5-6 seconds until the light comes on.
Step 4. Pair the device
After you have set the headset to enter Pairing mode, then switch to a Bluetooth-enabled music player device and enable Bluetooth on the device.
