4 Ways to Connect a DVR to a TV

Video: 4 Ways to Connect a DVR to a TV

Video: How to setup a TV Antenna (How to get Free TV Forever) 2024, December

2024 Author: Jason Gerald | [email protected]. Last modified: 2023-12-16 10:50

You can connect your DVR box to your TV in a variety of ways, from the easiest HDMI cable, HDMI-DVI cable, component, to S-Video. The type of connection you can use depends on the available ports on your TV and DVR.

Step

Method 1 of 4: HDMI Cable

Step 1. Before starting, make sure the TV and DVR are turned off

You can leave both devices connected to a power source, as long as they are turned off during the connection process

Step 2. Connect one end of the HDMI cable to the HDMI 1 Out port on the back of the DVR

Step 3. Connect the other end to the 1 In HDMI port on the side or back of your TV

Step 4. Turn on the TV and DVR

Now, the two devices are connected. To use the device, you just need to switch the TV input to the correct HDMI input.

Press and hold the Source or Input button on your TV or remote to change the input source, until HDMI is selected

Method 2 of 4: DVI. Cable

Step 1. Before starting, make sure the TV and DVR are turned off

You can leave both devices connected to a power source, as long as they are turned off during the connection process

Step 2. Connect one end of the DVI cable to the DVI In port on the side or back of your TV

If you can't find an HDMI-DVI cable, you can use a regular HDMI cable and an HDMI-DVI adapter. You just need to connect the HDMI end to the HDMI port on the adapter, then connect the DVI end on the adapter to the DVI In port on your TV

Step 3. Connect the other end of the HDMI cable to the HDMI 1 Out port on the back of the DVR

If you are using an adapter, connect the unconnected end to the HDMI 1 Out port on the back of the DVR

Step 4. Connect the other end of the L/R audio cable to the appropriate Audio In port on the back of your TV

Connect the red plug to the red Audio In Right port, and the white plug to the white Audio In Left port

Step 5. Connect the other end of the L/R audio cable to the appropriate Audio In port on the back of your DVR

Connect the red plug to the red Audio In Right port, and the white plug to the white Audio In Left port

Step 6. Turn on the TV and DVR

Now, the two devices are connected. To use the device, you just need to move the TV input to the correct input.

Press and hold the Source or Input button on your TV or remote to change the input source, until DVI is selected, as the input source used is DVI

Method 3 of 4: Component Cable

Step 1. Before starting, make sure the TV and DVR are turned off

You can leave both devices connected to a power source, as long as they are turned off during the connection process

Step 2. Connect the green, blue, and red ends of the cables to the appropriate Component In ports on the side or back of your TV

Connect the green connector to the green Y port, the blue connector to the blue Pb port, and the red connector to the red Pr port

Step 3. Connect the other end of the component cable to the Component Out port on the DVR, matching the color of the connector

Connect the green connector to the green Y port, the blue connector to the blue Pb port, and the red connector to the red Pr port

Step 4. Connect the other end of the audio cable to the appropriate Audio in port on the back of your TV

You must use a separate L/R audio cable.

Connect the red plug to the red Audio In Right port, and the white plug to the white Audio In Left port

Step 5. Connect the other end of the L/R audio cable to the appropriate Audio In port on the back of your DVR

Connect the red plug to the red Audio In Right port, and the white plug to the white Audio In Left port

Step 6. Turn on the TV and DVR

Now, the two devices are connected. To use the device, you just need to move the TV input to the correct input.

Press and hold the Source or Input button on your TV or remote to change the input source, until Video is selected, as the input source used is Video

Method 4 of 4: S-Video Cable

Step 1. Before starting, make sure the TV and DVR are turned off

You can leave both devices connected to a power source, as long as they are turned off during the connection process

Step 2. Connect the other end of the standard S-Video cable to the S-Video in port on the back of the TV

Step 3. Connect the other end of the S-video cable to the S-Video Out port on the back of the DVR

Step 4. Connect the other end of the audio cable to the appropriate Audio in port on the back of your TV

You must use a separate L/R audio cable.

Connect the red plug to the red Audio In Right port, and the white plug to the white Audio In Left port

Step 5. Connect the other end of the L/R audio cable to the appropriate Audio In port on the back of your DVR

Connect the red plug to the red Audio In Right port, and the white plug to the white Audio In Left port

Step 6. Turn on the TV and DVR

Now, the two devices are connected. To use the device, you just need to move the TV input to the correct input.

5 Ways to Connect a DVD Player

In today's world, DVDs are a common item in the entertainment world, and DVD players are cheaper than restaurant meals! After connecting the DVD player to the TV, you can watch all available movie collections. It's also easy to connect a DVD player to a modern TV.

5 Ways to Connect Wooden Blocks

There are many reasons why you might need to join wooden blocks, such as when one joist isn't long enough, or if two blocks meet at the top of a post. There are a variety of ways to make joints using proven carpentry methods. This question-and-answer article provides useful information so you can connect wooden blocks in several different ways.

4 Ways to Connect Laptop to Internet Via Mobile

This wikiHow teaches you how to use the cellular data connection on your iPhone or Android to connect your computer to the internet. This process is known as tethering. However, not all cellular service providers support this process. If the cellular service provider you are using supports tethering, keep in mind that this process can increase your monthly cellular data quota usage so that your quota limit can run out faster.

3 Ways to Connect to the Internet

While connecting to the internet is an easy job, it can be difficult for those who are not familiar with the network or the type of internet you want to use. However, as the internet plays an increasingly vital role in our lives, of course you need to know how to connect to this network.

3 Ways to Connect GoPro to Computer

This wikiHow teaches you how to connect your GoPro camera to your computer so you can download and edit the photos and videos you take. The easiest way to connect your camera to your computer is via the USB cable that came with your GoPro purchase.

Table of contents:

Video: 4 Ways to Connect a DVR to a TV

Step

Method 1 of 4: HDMI Cable

Step 1. Before starting, make sure the TV and DVR are turned off

You can leave both devices connected to a power source, as long as they are turned off during the connection process

Step 2. Connect one end of the HDMI cable to the HDMI 1 Out port on the back of the DVR

Step 3. Connect the other end to the 1 In HDMI port on the side or back of your TV

Step 4. Turn on the TV and DVR

Press and hold the Source or Input button on your TV or remote to change the input source, until HDMI is selected

Method 2 of 4: DVI. Cable

Step 1. Before starting, make sure the TV and DVR are turned off

You can leave both devices connected to a power source, as long as they are turned off during the connection process

Step 2. Connect one end of the DVI cable to the DVI In port on the side or back of your TV

If you can't find an HDMI-DVI cable, you can use a regular HDMI cable and an HDMI-DVI adapter. You just need to connect the HDMI end to the HDMI port on the adapter, then connect the DVI end on the adapter to the DVI In port on your TV

Step 3. Connect the other end of the HDMI cable to the HDMI 1 Out port on the back of the DVR

If you are using an adapter, connect the unconnected end to the HDMI 1 Out port on the back of the DVR

Step 4. Connect the other end of the L/R audio cable to the appropriate Audio In port on the back of your TV

Connect the red plug to the red Audio In Right port, and the white plug to the white Audio In Left port

Step 5. Connect the other end of the L/R audio cable to the appropriate Audio In port on the back of your DVR

Connect the red plug to the red Audio In Right port, and the white plug to the white Audio In Left port

Step 6. Turn on the TV and DVR

Press and hold the Source or Input button on your TV or remote to change the input source, until DVI is selected, as the input source used is DVI

Method 3 of 4: Component Cable

Step 1. Before starting, make sure the TV and DVR are turned off

You can leave both devices connected to a power source, as long as they are turned off during the connection process

Step 2. Connect the green, blue, and red ends of the cables to the appropriate Component In ports on the side or back of your TV

Connect the green connector to the green Y port, the blue connector to the blue Pb port, and the red connector to the red Pr port

Step 3. Connect the other end of the component cable to the Component Out port on the DVR, matching the color of the connector

Connect the green connector to the green Y port, the blue connector to the blue Pb port, and the red connector to the red Pr port

Step 4. Connect the other end of the audio cable to the appropriate Audio in port on the back of your TV

Connect the red plug to the red Audio In Right port, and the white plug to the white Audio In Left port

Step 5. Connect the other end of the L/R audio cable to the appropriate Audio In port on the back of your DVR

Connect the red plug to the red Audio In Right port, and the white plug to the white Audio In Left port

Step 6. Turn on the TV and DVR

Press and hold the Source or Input button on your TV or remote to change the input source, until Video is selected, as the input source used is Video

Method 4 of 4: S-Video Cable

Step 1. Before starting, make sure the TV and DVR are turned off

You can leave both devices connected to a power source, as long as they are turned off during the connection process

Step 2. Connect the other end of the standard S-Video cable to the S-Video in port on the back of the TV

Step 3. Connect the other end of the S-video cable to the S-Video Out port on the back of the DVR

Step 4. Connect the other end of the audio cable to the appropriate Audio in port on the back of your TV

Connect the red plug to the red Audio In Right port, and the white plug to the white Audio In Left port

Step 5. Connect the other end of the L/R audio cable to the appropriate Audio In port on the back of your DVR

Connect the red plug to the red Audio In Right port, and the white plug to the white Audio In Left port

Step 6. Turn on the TV and DVR

Recommended: